Fujifilm Instax 300 Wide Instant Camera

The specific type or model of battery used in a product, such as brand, part number, chemistry, or cell configuration.

The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.

The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.

Indicates whether the product includes a built‑in flash unit that can be used for illumination during photography or videography. A value of "Yes" means the device has such a flash; a value of "No" means it does not.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The standard designation of a cylindrical battery, such as AA, AAA, CR2, etc., indicating its physical form factor and compatibility with devices that accept that type.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render the visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The maximum duration that a camera’s shutter remains open to expose the sensor or film, expressed in seconds or fractions of a second (e.g., 1/4000 s). It determines how motion is captured and affects exposure; shorter times freeze action while longer times allow more light for low‑light situations.

A list of the available settings for a camera or imaging device’s flash system, such as Auto, Manual, Flash off, Flash on, Red‑eye reduction, Slow synchronization, and other manufacturer‑specific options. Each value represents a selectable mode that determines how the flash is activated during image capture.

The minimum and maximum distance, expressed in meters, at which a camera’s flash can effectively illuminate a subject or scene. This range indicates the effective reach of the flash for proper exposure.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

A concise textual summary of the camera lens’s key characteristics, such as focal length, aperture range, autofocus type, zoom capability or special features. The value can be a single phrase (e.g., "31mm f/9") or a brief sentence describing the lens system (e.g., "Autofocus system via 2 fixed focus zones 0.55m-1.3m, 0.6m-infinity"). It is intended to give buyers quick insight into what type of lens is included with the product.

The aspect ratio describes the proportional relationship between the width and height of a lens’s image circle or sensor coverage, expressed as a simple fraction (e.g., 12/9). It indicates how wide or tall the captured image will be relative to its other dimension. This value helps users compare lenses for compatibility with camera sensors and desired framing.

The set of camera settings that determine how the sensor is exposed to light. Common values include Auto, Aperture priority, Shutter priority, Manual and combinations thereof. Each value represents a selectable mode that controls shutter speed, aperture, ISO or a combination of these parameters.

The optical magnification factor of a device such as a camera lens, binoculars or telescope. It indicates how many times larger an object appears compared to its actual size when viewed through the product. Values are expressed as a multiplier (e.g., 2x, 10x).

The physical dimensions of a picture or image, expressed as width and height in a length unit such as millimeters, centimeters, or inches. It indicates the overall size of the printed or displayed image and is useful for comparing frames, prints, and camera sensor outputs.

The longest duration that a camera’s shutter remains open during exposure, expressed in seconds or fractions of a second (e.g., 30 s, 0.5 s). This value indicates the maximum time the sensor is exposed to light for each frame and helps users understand how long a camera can capture motion before freezing it.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.