Fujitsu Fi-7900 ADF + Manual Feed Scanner 600 x 600 DPI A3 in Black and Grey

The set of colour options that a scanner can produce when scanning an image or document. Each value represents a supported mode such as "Grayscale", "Monochrome", or "Colour" and may be listed separately if multiple modes are available.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as an integrated monitor on a laptop or a built-in display on appliances. A value of "Yes" means the device has such a display; a value of "No" means it does not.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

Indicates whether a scanner can perform color scans. The value is "Yes" if the device supports color scanning, and "No" if it only performs monochrome scans.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product comes with drivers included in the package or available for download. A value of "Yes" means that drivers are supplied, while a value of "No" indicates they are not provided and must be obtained separately.

Indicates whether a device can scan both sides of a sheet in a single pass. A value of "Yes" means the scanner automatically captures the front and back of each page, while "No" indicates that only one side can be scanned at a time.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether the product complies with applicable legal or regulatory requirements, such as safety standards, environmental certifications, or warranty terms. A value of "Yes" confirms compliance; "No" indicates non‑compliance.

Indicates whether the product supports or is compatible with the Letter paper size (8.5" x 11"), commonly used in North America.

The main illumination source used by the product, such as LED, laser, CCFL, or other light-emitting technologies. It indicates whether the device uses a single light source or multiple sources and helps users understand the lighting characteristics of the item.

The largest standard ISO A-series paper format that a device can handle, expressed as the ISO code (e.g., "A4", "A3"). This attribute indicates the maximum sheet size supported by printers, scanners, copiers, and similar equipment.

The largest document dimension that a scanner can capture in a single pass, expressed as width by height (e.g., 216 × 356 mm). This value indicates the maximum area the device can scan without needing to cut or stitch images.

The pixel dimensions of a scanner’s optical sensor, expressed as width by height (e.g., 1200×2400). It indicates how many pixels can be captured per scan and determines the sharpness and detail of scanned images.

The number of distinct colours that a device’s output can represent, expressed as an integer followed by the unit "bit" (e.g., 24 bit). This metric indicates the richness and fidelity of colour reproduction for images or video sent to the device.

The type of interface or connector used to connect a PC or computer peripheral to another device or system. Typical values include USB, RS‑232, RJ‑45, and other common port types, optionally specifying version or variant (e.g., USB 2.0, USB 3.0). This attribute helps users identify the required cables or adapters for connectivity.

The type of electrical supply that powers the device, such as mains AC, DC, USB, battery, or a combination of these options.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

A list of communication interfaces or software protocols that a scanner can use to transfer scanned images to a computer or network, such as TWAIN, WIA, SANE, ICA, ISIS, and others. Each entry represents an available option for connecting the device to capture software.

A list of file extensions that a scanner can produce or accept when digitizing documents, such as JPG, PDF, TIFF, BMP, PNG, RTF, CSV, HTML, OCR, XPS, TXT and XLS. The values are comma‑separated strings representing each supported format.

The functional configuration of a scanner, indicating how documents are fed into the device. Common types include flatbed scanners with automatic document feeders (ADF), sheet‑fed scanners, single‑pass or dual‑pass ADFs, and specialized modes such as 1D/2D barcode readers. This attribute helps users understand whether the scanner can handle single pages, multiple pages automatically, or specific scanning formats.

Indicates whether the product supports a low‑power or standby mode that reduces energy consumption when the device is not actively in use.

The specific type of USB connector used by a device, such as USB Type‑A, USB Type‑B, USB Type‑C, Micro‑USB, Mini‑USB, or other variants. It indicates the physical port that allows data transfer and power delivery between the device and peripherals.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.