GIGABYTE B450 AORUS M Socket AM4 AMD (B450AORUSM) Gaming Motherboard

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

Indicates whether the product includes a standard ATX power connector with 24 pins, which is used to supply main power to motherboards and other components in desktop computers.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

A list of software programs and utilities that come pre-installed or bundled with the product, such as operating systems, drivers, antivirus suites, or other essential applications.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

Indicates whether the product includes a clear‑CMOS jumper, a small connector that allows resetting the CMOS memory to factory defaults. A value of "Yes" means the jumper is present and can be used for troubleshooting or configuration reset; "No" indicates it is absent.

List of processor families that the product can support, such as Intel Celeron, Intel Core i5, AMD Ryzen 3, etc. Each value represents a distinct CPU family or brand that is compatible with the hardware platform.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The method used to dissipate heat from a component or system, such as active cooling (fans or liquid loops), passive heat sinks, or no active cooling. It indicates whether the product relies on airflow, conduction, or other mechanisms to maintain safe operating temperatures.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product comes with drivers included in the package or available for download. A value of "Yes" means that drivers are supplied, while a value of "No" indicates they are not provided and must be obtained separately.

Represents how many DVI‑D connectors are present on the product. The value is a simple integer indicating the total count of DVI‑D ports, regardless of version or configuration.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

Indicates whether the product includes an EPS (Extended Power Supply) connector, typically used to provide additional power to high‑performance components such as GPUs or server CPUs.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the product has an audio connector on its front panel. The value is "Yes" if a front‑panel audio jack or similar input is present, and "No" otherwise.

Indicates whether the product includes a connector on its front panel. The value can be "Yes" or "No", representing the presence or absence of this port.

Indicates whether a device supports HDCP (High‑bandwidth Digital Content Protection), allowing it to play or display protected digital content on compatible screens and audio/video equipment.

The physical width of a hard disk drive expressed in inches or centimeters. It indicates the standard size that determines which enclosures, bays, and mounting hardware are compatible with the drive.

Indicates whether the product supports Intel’s Extreme Memory Profile (XMP), a technology that allows users to apply pre‑defined memory timings and frequencies for optimal performance.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The amount of dedicated video memory available on a graphics adapter or GPU, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the GPU can store for textures, frame buffers and other rendering tasks, affecting performance in gaming, 3D applications and high‑resolution displays.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The maximum pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates the highest resolution that a device can output or support and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

The form factor of the memory module that a product can accept, such as DIMM or SO‑DIMM. It indicates whether the device uses standard desktop RAM modules (DIMM) or smaller laptop‑style modules (SO‑DIMM).

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The chipset family identifies the group of integrated circuits that manage communication between a computer’s CPU, memory, and peripheral devices on a motherboard. It indicates the supported processor families, available I/O interfaces, and overall system capabilities, helping users assess compatibility and feature sets for motherboards or other hardware components.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.

The total count of electrical connectors on a computer chassis that accept cooling fans. This value indicates how many separate fan units can be attached to the case for airflow management, allowing users to assess cooling capacity and compatibility with their system.

The total count of hard disk drives that the product can accommodate or support. It indicates how many separate HDD units are physically installable or usable within the device, regardless of size, interface type, or capacity.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate DIMM sticks can be installed or upgraded, regardless of size or speed.

A list of hardware components that the system tracks to monitor their operational status and performance. Typical entries include CPU, fan, temperature sensors, voltage regulators, power supply units, and other critical subsystems. The list helps users understand which parts are being monitored for health alerts or performance metrics.

The type of electrical supply that powers the device, such as mains electricity, batteries, USB power, or a combination of these options.

Indicates whether a quick‑installation guide is provided with the product. A value of "Yes" means that a brief, step‑by‑step manual or overview is included to help users set up the device quickly; "No" indicates that no such guide is supplied.

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

Indicates whether the product includes a digital audio output port using the Sony/Philips Digital Interface (S/PDIF). A value of "Yes" means the port is present; "No" means it is absent.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

A list of the types of storage drives that a product can accommodate or use, such as HDD, SSD, or hybrid configurations. Each entry indicates a distinct drive type that is supported by the device’s bays, slots, or external interfaces.

The SMBIOS (System Management BIOS) version indicates the firmware revision that provides system information to the operating system and management tools. It is typically expressed as a numeric or alphanumeric string such as "2.7" or "3.1", and it helps users verify compatibility, update requirements, and support for hardware features.

Indicates whether the product includes a physical port that can accept a Trusted Platform Module (TPM) chip, enabling hardware‑based security features such as secure boot and encrypted storage.

Indicates whether the memory modules in the product are unbuffered (non‑registered). A value of "Yes" means the device uses standard unbuffered RAM, while "No" indicates that buffered or registered memory is used.