Samsung 970 PRO Phoenix NVMe 1.3 M.2 Solid State Drive

The maximum number of input/output operations per second that a storage device can perform when reading data in 4‑KB blocks. This metric indicates how quickly the device can retrieve small, non‑sequential pieces of information and is useful for evaluating performance in database or high‑transaction workloads.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The model or designation of a hardware controller component, such as a network interface card, storage controller, or other embedded controller. It identifies the specific product line or series used in the device and helps users determine compatibility, performance characteristics, and support options.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.

The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.

The amount of electrical power that a device consumes during operation, expressed in watts (W). It represents the typical energy draw of the product while it is active and can be used to estimate operating costs or compare efficiency across similar devices.

Indicates the cryptographic method or algorithm used to protect data on the device, such as AES, WEP, or other encryption ciphers. The value is a free‑text string that may include the algorithm name and bit length (e.g., "AES 256-bit"), and can be presented in any case or format by the manufacturer.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

A list of the physical or logical interfaces that a product can use to connect with other devices or components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, and similar standards.

The calendar date on which a product was first made available to the public or released for sale. It is expressed in the format YYYY-MM-DD and can be used to filter, sort, or display the launch timeline of the item.

The average time interval between successive failures of a product or component, expressed in hours or other standard time units. It indicates the expected reliability and durability of the item under normal operating conditions.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

The type of NAND flash memory cells used in a storage device, such as Single Level Cell (SLC), Multi‑Level Cell (MLC), Triple‑Level Cell (TLC) or Enterprise MLC (eMLC). It indicates how many bits are stored per cell and influences performance, endurance and cost.

The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.

Indicates whether the product includes an NVMe (NVM Express) interface for high‑speed solid state storage.

The range of temperatures in which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.

Indicates the number of data lanes available on a PCI Express interface, expressed as a string such as "x4", "x8" or "x16". This value represents the bandwidth capacity of the interface and is used to determine compatibility with devices that require a specific lane count.

The maximum rate at which a device can read data from storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can retrieve information for processing or transfer.

Indicates whether a storage device supports the Self‑Monitoring, Analysis and Reporting Technology (S.M.A.R.T.) feature set, which allows the drive to report health status and predict failures.

A list of security-related features or technologies that a product supports, such as encryption methods, authentication mechanisms, physical locks, and network security protocols.

The mass, in grams, of a component or device that has been tested to determine its ability to withstand a non‑operating shock event. This value represents the total weight of the unit—including any internal parts and packaging if specified—used during the shock test.

The range of temperatures in which a device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

Indicates whether the storage device supports the TRIM command, which allows an operating system to inform the drive which blocks of data are no longer considered in use and can be wiped internally. This feature improves performance and longevity on solid‑state drives by enabling efficient garbage collection.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.