Seagate 5 TB Internal Hard Drive for Computer Desktop PC

Identifiers
Model	Seagate ST5000LM000
MPN	Seagate ST5000LM000
Dimensions / Weight
Key Features
Application A concise statement of the intended or most suitable use cases for a product, such as the type of environment (indoor or outdoor), activity (gaming, office work, media consumption) or general application category. It helps customers quickly determine whether the item fits their needs.	Internal PC/Laptop
Average latency The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.	5.6 ms
Buffer The amount of data that a device can temporarily store in its internal memory before processing or transferring it. The value is expressed with a digital capacity unit (e.g., kilobytes, megabytes). This attribute helps understand the performance and efficiency of hardware when handling information streams.	128 MB
Bytes per sector The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.	4096
Capacity The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.	5242880 MB
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.	100.4 mm
Device supported A list of device categories that the product is compatible with, such as Desktop Computer, Notebook, Network Camera, or Router. Each value represents a distinct type of hardware or system that can be supported by the product.	Notebook / Desktop PC / Storage System
Drive Connection A list of the physical or logical interfaces that a hard drive uses to connect with other components, such as SATA, M.2 PCIe, U.2, SAS, NVMe, USB, or other standard connections. The values are comma‑separated and represent the supported connection types for the drive.	SATA
Drive interface standard	SATA/600
Drive Size The physical form factor or dimension of a storage drive, expressed as a size in inches (e.g., "2.5"", "3.5""), an M.2 module designation (e.g., "M.2 2280"), or a memory card type (e.g., "SD Card", "microSDXC"). This attribute helps users determine compatibility with bays, enclosures, and devices that accept specific drive sizes.	2.5"
Drive type The classification of a storage device’s mechanical or solid‑state nature, such as Internal, External, Portable, Motorized, Manual, SSD, HDD, Blu‑ray Writer, etc. It indicates how the drive is mounted and operated within or outside a system.	Internal
Environmentally friendly Indicates whether the product is designed, manufactured, or marketed with environmental considerations such as reduced energy consumption, recyclable materials, or compliance with eco‑friendly standards. A value of "Yes" means the product meets at least one recognized environmentally friendly criterion; "No" indicates it does not.	Yes
HDD Capacity The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.	5000 GB
HDD number of heads The total count of read/write head assemblies present in a hard disk drive (HDD). Each head is responsible for accessing data on one platter surface; the number of heads determines how many platters can be serviced simultaneously and influences the drive’s capacity and performance. The value is an integer without any unit.	10
HDD speed The number of revolutions per minute (RPM) at which a hard‑disk drive’s spindle turns, indicating the drive’s data access performance and endurance characteristics.	5400 RPM
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.	15 mm
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.	Serial ATA III
Non-operating shock The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.	650 G
Non-operating vibration	3.52 G
Operating shock	300 G
Operating vibration The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.	0.7 G
Operating voltage The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.	5 V
Power consumption (read)	1.9 W
RoHS compliance Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.	Yes
Start-up current The electrical current drawn by a device when it first powers on, expressed in amperes (A). It represents the initial surge of current required to start the product and can help users assess power supply compatibility or identify potential overload risks.	1.2 A
Storage drive adapter included Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.	No
Technology Type The underlying storage medium used by the product, such as hard disk drive (HDD), solid‑state drive (SSD), or hybrid configurations. It indicates the technology that determines performance characteristics like speed, durability and capacity.	HDD
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.	190 g
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.	69.9 mm

Seagate is a brand of computer hard drives and storage solutions. The company produces a wide range of products for both personal and business use, including external hard drives, solid state drives, and storage systems. Seagate is one of the leading providers of storage solutions in the world, and its products are known for their quality and reliability.