Seagate IronWolf 6 TB Internal Hard Drive

Identifiers
Model	Seagate ST6000VN0033
MPN	Seagate ST6000VN0033
Dimensions / Weight
Key Features
Average latency The typical time delay, measured in milliseconds, between a request and its response for storage devices such as hard drives or SSDs. It reflects how quickly data can be accessed from the device and is useful for comparing performance across similar products.	4.16 ms
Bytes per sector The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.	512
Cache memory The amount of internal memory reserved as a cache within a device or component, expressed in a data size such as megabytes (MB) or gigabytes (GB). It represents the temporary storage used to accelerate read/write operations by holding frequently accessed data closer to the processor or controller.	256 MB
Colour The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.	Silver
Component for Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.	NAS
Data transfer rates The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.	Up to 600 MB/s
Depth The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.	147 mm
Disk Capacity The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.	6 TB
Disk form factor The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.	3.5
Disk speed The maximum rotational speed of a hard‑disk drive’s spindle, expressed in revolutions per minute (RPM). This value indicates how fast the drive’s platters spin and is useful for comparing performance or suitability across different models.	7200RPM
Drive capacity The total amount of digital storage that a drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the drive can store and compare different drives across products.	6000 GB
Enclosure Type The form or mounting style of a hardware component, such as internal, portable, desktop, rack‑mountable, or external. It indicates how the device is physically housed and where it can be installed.	Internal
Form factor Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.	Hard Disk Drive
HDD sustained transfer rate The average speed at which a storage device can read or write data under typical operating conditions, expressed in megabytes per second (MiB/s). This value reflects the sustained throughput that users can expect during continuous data transfers.	210 MiB/s
HDD Type The underlying storage technology used by the product, such as solid‑state drive (SSD), hard disk drive (HDD), embedded multi‑media card (eMMC) or a combination of these. It indicates the performance, durability and typical use cases for the device’s internal or external storage.	HDD
Height The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.	26.1 mm
Interface List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.	Serial ATA III
Interface type A list of the physical or logical interfaces that a product can use to connect with other devices or components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, and similar standards.	SATA III
ISPC Code A numeric identifier that uniquely represents a product or component within the inventory system. It is used to track, reference and manage items across catalogs, orders and logistics. The value is typically an integer such as 43174 or 40114.	40363
Mean Time Between Failure MTBF The average time interval between successive failures of a product or component, expressed in hours or other standard time units. It indicates the expected reliability and durability of the item under normal operating conditions.	1000000 Hours
Non-operating shock The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.	250 G
Operating shock	70 G
Pack quantity The total number of individual units contained within a single package or bundle. This value helps customers understand how many pieces they receive when purchasing the product, and it is useful for inventory, shipping, and comparison purposes.	1
Power consumption (StandBy)	0.6 W
Relative humidity The range of relative humidity (expressed as a percentage) within which the product is designed to operate reliably. Values are given as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.	5 to 90 %
Shock non operating The mass, in grams, of a component or device that has been tested to determine its ability to withstand a non‑operating shock event. This value represents the total weight of the unit—including any internal parts and packaging if specified—used during the shock test.	250Gs for 2ms
Shock operating The mass (in grams) of a component or device that has been tested to withstand shock without failure. This value represents the total weight of the unit, including any internal parts and packaging if specified, and indicates the robustness of the product under impact conditions.	70Gs for 2ms
Start-up current The electrical current drawn by a device when it first powers on, expressed in amperes (A). It represents the initial surge of current required to start the product and can help users assess power supply compatibility or identify potential overload risks.	1.8 A
Storage drive adapter included Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.	No
Warranty The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.	Five years.
Weight The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.	705 g
Width The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.	101.8 mm

Seagate is a brand of computer hard drives and storage solutions. The company produces a wide range of products for both personal and business use, including external hard drives, solid state drives, and storage systems. Seagate is one of the leading providers of storage solutions in the world, and its products are known for their quality and reliability.