Seagate SkyHawk 3 TB Surveillance Internal Hard Drive - ST3000VX010

A concise statement of the intended or most suitable use cases for a product, such as the type of environment (indoor or outdoor), activity (gaming, office work, media consumption) or general application category. It helps customers quickly determine whether the item fits their needs.

The amount of data that a device can temporarily store in its internal memory before processing or transferring it. The value is expressed with a digital capacity unit (e.g., kilobytes, megabytes). This attribute helps understand the performance and efficiency of hardware when handling information streams.

The number of bytes contained in each storage sector of a device, indicating the smallest unit of data that can be read or written by the medium.

The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

A list of the physical or logical interfaces that a hard drive uses to connect with other components, such as SATA, M.2 PCIe, U.2, SAS, NVMe, USB, or other standard connections. The values are comma‑separated and represent the supported connection types for the drive.

The physical form factor or dimension of a storage drive, expressed as a size in inches (e.g., "2.5"", "3.5""), an M.2 module designation (e.g., "M.2 2280"), or a memory card type (e.g., "SD Card", "microSDXC"). This attribute helps users determine compatibility with bays, enclosures, and devices that accept specific drive sizes.

The classification of a storage device’s mechanical or solid‑state nature, such as Internal, External, Portable, Motorized, Manual, SSD, HDD, Blu‑ray Writer, etc. It indicates how the drive is mounted and operated within or outside a system.

The total amount of digital storage that an internal hard drive can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data the device’s built‑in hard drive can store and compare storage options across products.

The highest theoretical speed at which a hard disk drive can send or receive data over its interface, expressed in bits per second (bps) or multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different drives and interfaces.

The average speed at which a storage device can read or write data under typical operating conditions, expressed in megabytes per second (MiB/s). This value reflects the sustained throughput that users can expect during continuous data transfers.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

The mass of a component or device measured while it is not operating, expressed in grams. This value represents the total weight that the unit can sustain during shock testing and includes any internal parts and packaging if specified.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.

The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.

The electrical power drawn by a device when it is powered on but not performing any active tasks, expressed in watts (W). This value represents the minimal energy usage during idle or standby periods and can be used to estimate background consumption or compare efficiency across similar products.

Represents the count of individual units or pieces included in a product offering. It indicates how many separate items are available for purchase or use, such as the number of components in a bundle, the quantity of devices in a set, or the amount of consumables supplied. The value is an integer without any unit of measure.

The maximum speed at which a component or device operates, expressed in an appropriate unit such as revolutions per minute (RPM), hertz (Hz) for frequencies, or other velocity units. It indicates how fast the product can perform its primary function and allows users to compare performance across models.

The electrical current drawn by a device when it first powers on, expressed in amperes (A). It represents the initial surge of current required to start the product and can help users assess power supply compatibility or identify potential overload risks.

Indicates whether a storage‑drive adapter is supplied with the product. A value of "Yes" means an adapter is included in the package, while "No" indicates that no adapter is provided and must be purchased separately.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The technology or media format used for internal or external data storage, such as hard disk drives (HDD), solid‑state drives (SSD), eMMC, microSD cards, or combinations of these. It indicates the underlying storage medium that determines performance, capacity, and compatibility with a device.

The underlying storage medium used by the product, such as hard disk drive (HDD), solid‑state drive (SSD), or hybrid configurations. It indicates the technology that determines performance characteristics like speed, durability and capacity.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.