TB Kingston KC600 2.5" SATA III Solid State Drive

The maximum number of input/output operations per second that a storage device can perform when reading data in 4‑KB blocks. This metric indicates how quickly the device can retrieve small, non‑sequential pieces of information and is useful for evaluating performance in database or high‑transaction workloads.

The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The model or designation of a hardware controller component, such as a network interface card, storage controller, or other embedded controller. It identifies the specific product line or series used in the device and helps users determine compatibility, performance characteristics, and support options.

The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.

The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.

The amount of electrical power that a device consumes during operation, expressed in watts (W). It represents the typical energy draw of the product while it is active and can be used to estimate operating costs or compare efficiency across similar devices.

The electrical power drawn by a device while it is in standby mode, expressed in watts (W). It represents the minimal energy usage when the product is powered on but not actively performing tasks, and can be used to estimate idle consumption or compare efficiency across similar products.

The form or mounting style of a hardware component, such as internal, portable, desktop, rack‑mountable, or external. It indicates how the device is physically housed and where it can be installed.

Indicates the cryptographic method or algorithm used to protect data on the device, such as AES, WEP, or other encryption ciphers. The value is a free‑text string that may include the algorithm name and bit length (e.g., "AES 256-bit"), and can be presented in any case or format by the manufacturer.

Indicates whether the device includes a dedicated hardware-based encryption feature that protects data integrity and confidentiality through an embedded component.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

List of physical or logical interfaces that allow communication between a hard drive and other devices, such as SATA, M.2 PCIe, U.2, SAS, NVMe, or other standard connections.

A list of the physical or logical interfaces that a product can use to connect with other devices or components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, and similar standards.

The average time interval between successive failures of a product or component, expressed in hours or other standard time units. It indicates the expected reliability and durability of the item under normal operating conditions.

The form or packaging of a memory module, such as DIMM, SO‑DIMM, USB flash drive, microSDHC, or other storage media. It indicates the physical format that determines compatibility with motherboards, devices, and accessories.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

The mass of a device measured while it is in normal operation, expressed in grams (g). This value indicates the amount of material that contributes to vibration during use and can help assess mechanical stability or compliance with vibration standards.

The maximum rate at which a device can read data from storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can retrieve information for processing or transfer.

The number of times per second that a display updates its image, expressed in hertz (Hz). It indicates the smoothness and responsiveness of motion on the screen; higher rates generally provide a more fluid visual experience.

The maximum mechanical shock level that a product can withstand, expressed as an acceleration in g‑forces. This value indicates the device’s ability to survive sudden impacts or vibrations while remaining functional. It is typically measured under specified duration and waveform conditions (e.g., half‑sine pulse of 0.5 ms). Consumers use it to assess durability for transport, handling, or operating environments that involve vibration or impact.

The total amount of data that can be stored on a solid‑state drive (SSD) installed in the product, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates how much information the device can hold and helps users compare storage options across products.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.