1080p Smart Security Camera by TP-Link Kasa

The f‑number (aperture value) of a camera lens or optical system, indicating the size of the aperture opening. It determines how much light enters the sensor and affects depth‑of‑field. Values are typically expressed as a numeric value prefixed with "F" (e.g., F1.2, F2.8) or as a single numeric value when the "F" is omitted.

A list of audio codecs and formats that a product can play or output, such as Dolby Digital, DTS, AAC, MP3, FLAC, etc. Each value represents a specific audio stream supported by the device’s internal decoder or external connectivity options.

The general classification of a camera, such as compact, single‑lens reflex (SLR), mirrorless interchangeable lens camera (MILC), bridge, or video camera. It indicates the form factor and primary use case of the device.

The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The highest electrical current a device draws from its power source during normal operation, expressed in amperes (A). It indicates the maximum current that the product requires and helps users verify compatibility with power supplies or sockets.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The frequency of the alternating current supplied to a device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product and ensures proper functionality and safety.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum mains supply voltages compatible with the device across different regions.

Indicates the cryptographic method or algorithm used to protect data on the device, such as AES, WEP, or other encryption ciphers. The value is a free‑text string that may include the algorithm name and bit length (e.g., "AES 256-bit"), and can be presented in any case or format by the manufacturer.

Indicates whether the product has an Ethernet interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

A list of physical or logical interfaces that a product exposes for external connectivity, such as USB, SATA, Ethernet, Wi‑Fi, Bluetooth, HDMI, DisplayPort, and other standard ports. Each entry represents an interface type supported by the device for connecting to peripherals, networks, or other systems.

Indicates whether the product is intended for use inside a building or structure. A value of Yes means the item can be installed indoors, while No indicates it is designed for outdoor environments.

Indicates whether a product is designed for use in outdoor environments. A value of "Yes" means the item meets typical outdoor requirements such as weather resistance, durability or suitability for external conditions; "No" indicates it is not intended for outdoor use.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The diagonal measurement of the image sensor in a camera or imaging device, expressed in inches or millimeters. It indicates the overall active area available for capturing light and is commonly used to compare sensor sizes such as 1/2.3", 1/1.7", APS‑C, Full‑Frame, etc.

Indicates whether the product can capture images or video in low‑light or darkness using infrared illumination, thermal imaging, or other night‑vision technologies.

The maximum distance at which a camera can capture images or video in low‑light or darkness using infrared illumination, thermal imaging, or other night‑vision technologies. The value is expressed as a linear measurement (typically meters) and may include optional unit conversions such as feet.

The highest pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

Indicates whether the product includes a built‑in microphone. A value of "Yes" means the device has at least one integrated microphone, while "No" indicates no built‑in microphone is present.

Indicates whether the product is capable of detecting motion in its environment. A value of "Yes" means that the device can sense movement and trigger internal processes, while "No" indicates that it lacks this functionality.

The total number of individual units contained within a single package or bundle. This value helps customers understand how many pieces they receive when purchasing the product, and it is useful for inventory, shipping, and comparison purposes.

A list of the Wi‑Fi standards that a device can connect to, such as IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

The electrical power output of each built‑in speaker in the product, expressed as a pair of values (e.g., "2 x 10 W" meaning two speakers each rated at 10 W). This attribute helps users compare audio performance and understand the power capacity of integrated speakers.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

Indicates whether a product can withstand exposure to outdoor elements such as rain, wind, and temperature fluctuations without damage. The value is typically "Yes" or "No", but may also include descriptive terms like "Weatherproof" or "Weather‑resistant" that convey the same meaning.