Alpenföhn 84000000182 All-in-One Liquid CPU Cooler

Indicates whether the product includes a built‑in fan that can be used for cooling or ventilation without requiring an external unit. A value of "Yes" means the device has such a fan; "No" means it does not.

The physical interface used to connect a fan to a power or control source, such as 3‑pin, 4‑pin PWM, Molex, or other proprietary connectors. This value indicates the shape and pin configuration of the fan’s plug so that compatible power supplies, fans, or controllers can be selected.

The maximum rotational speed of a fan or cooling component, expressed in revolutions per minute (RPM). This value indicates how fast the fan can spin under its highest operating condition and helps users compare cooling performance across models.

The maximum static pressure that a fan can generate or withstand, expressed in millimetres of water column height (mm H₂O). This value indicates the fan’s ability to overcome resistance in ducts or filters and is used to compare performance across similar cooling components.

The electrical potential difference supplied to a fan, expressed in volts (V). It indicates the nominal operating voltage required for the fan to run correctly and helps users match power supplies or adapters with compatible fans.

The hue or combination of hues emitted by a light source, expressed as common colour names such as "Red", "Green", "Blue" or comma‑separated lists like "Red, Green, Blue". This attribute indicates the perceived colour of the illumination produced by devices such as LEDs, lamps, or other lighting fixtures.

The physical interface used to connect a pump, such as a 3‑pin or 4‑pin connector. This value indicates the shape and pin configuration of the connector that allows power and signal transmission between the pump and its host system.

The electrical power drawn by a pump while it is operating, expressed in watts (W). This value represents the typical energy consumption of the pump during normal use and can be used to estimate running costs or compare efficiency across similar pumps.

The linear measurement of a radiator from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the radiator is and can be used for fitting, compatibility, or spatial planning.

The vertical dimension of a radiator measured from its lowest to highest point. The value is expressed in a physical unit such as millimetres, centimetres or inches and applies to any product where the height of the radiator is relevant, including computer cooling systems, HVAC units and other heat‑exchange components.

The material used to construct a radiator indicates the type of substance—such as aluminium, copper, steel or composite—that makes up its body. Knowing this helps users assess durability, heat transfer performance, weight and suitability for different cooling systems.

The horizontal measurement of a radiator, expressed in a linear unit such as millimetres or inches. It indicates how wide the radiator is from one side to the other and is used for sizing, fitting, and compatibility with computer cases, cooling systems, and mounting brackets.

The linear measurement of a waterblock from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the component is and can be used for fitting, compatibility, or spatial planning.