Asus B250 Mining Expert Motherboard

The type of connector used to supply 12‑volt electrical power to a device, such as a standard ATX power plug or other proprietary 12‑V connectors. It indicates the physical interface that allows the device to receive its main power supply.

Indicates whether the product can run or is compatible with a 64‑bit operating system or architecture. A value of "Yes" means the device supports 64‑bit software, while "No" indicates it does not.

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

Indicates whether the product supports individually addressable RGB lighting, allowing each LED to be controlled independently for custom color and effects.

Indicates whether the product includes a standard ATX power connector with 24 pins, which is used to supply main power to motherboards and other components in desktop computers.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

Indicates how many audio input connectors are available on the product, such as 3.5 mm jacks, mini‑jacks or optical inputs. The value is a simple integer representing the total count of these ports, regardless of their specific type or version.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

The company that designs and produces the chipset used in a motherboard or other computer component. This value helps users identify the source of the chipset technology, assess compatibility, support, and performance expectations.

Indicates whether the product includes a clear‑CMOS jumper, a small connector that allows resetting the CMOS memory to factory defaults. A value of "Yes" means the jumper is present and can be used for troubleshooting or configuration reset; "No" indicates it is absent.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The physical connector used by a processor to attach to a motherboard or other compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product includes at least one DisplayPort connector for high‑resolution video and audio transmission. A value of "Yes" means the device has a physical DisplayPort port; "No" indicates it does not.

Indicates whether the product comes with drivers included in the package or available for download. A value of "Yes" means that drivers are supplied, while a value of "No" indicates they are not provided and must be obtained separately.

Indicates whether the product includes a DVI (Digital Visual Interface) port for video output. A value of "Yes" means the device has a DVI connector; "No" means it does not.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Represents the total count of Ethernet LAN (RJ‑45) interfaces available on a product. The value is an integer indicating how many physical Ethernet ports are present, regardless of speed or generation.

Indicates whether the product has any FireWire (IEEE 1394) ports available for connecting compatible devices.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

Indicates whether the product has an audio connector on its front panel. The value is "Yes" if a front‑panel audio jack or similar input is present, and "No" otherwise.

Indicates whether the product includes a connector on its front panel. The value can be "Yes" or "No", representing the presence or absence of this port.

The specific model or designation of the graphics adapter present in a device, such as "Intel HD Graphics", "AMD Radeon Vega 8", or "NVIDIA GeForce GTX 1660". This value helps users understand the visual performance and capabilities that the product can deliver.

The total count of physical HDMI connectors available on the product for transmitting digital audio and video signals.

Indicates whether a device includes an integrated graphics processor, such as Intel HD Graphics or AMD Radeon Vega. The value is "Yes" if the product has built‑in GPU capabilities and "No" otherwise.

The model or designation of the network interface controller integrated into a device, such as "Intel I225V" or "Realtek RTL8111H". It identifies the specific hardware responsible for wired Ethernet connectivity and allows users to compare performance, compatibility, and supported speeds across products.

Indicates whether the product supports Intel’s Extreme Memory Profile (XMP), a technology that allows users to apply pre‑defined memory timings and frequencies for optimal performance.

Indicates whether the product includes an internal USB 3.0 header that can be used to connect peripherals such as keyboards, mice or storage devices directly inside the system. A value of "Yes" means the header is present and usable; "No" means it is absent.

Indicates whether the product includes an M.2 interface for connecting storage or expansion devices such as SSDs, Wi‑Fi cards, or NVMe modules.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The amount of dedicated video memory available on a graphics adapter or GPU, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the GPU can store for textures, frame buffers and other rendering tasks, affecting performance in gaming, 3D applications and high‑resolution displays.

The highest number of processor units that a computer or electronic device can accommodate, as determined by its motherboard or system architecture. This count indicates the maximum CPU capacity for parallel processing and is useful when comparing multi‑core or multi‑socket systems.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The highest pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

The maximum theoretical speed at which the system bus can transfer data, expressed in hertz (Hz) or commonly as megahertz (MHz). It indicates the bandwidth capacity of the internal communication pathway between components such as the CPU and memory or peripheral devices.

The number of memory channels supported by a motherboard or processor, indicating how many independent data paths are available for RAM modules. Common values include "Single", "Dual (2)", "Quad (4)" and similar descriptors. This attribute helps users understand the potential memory bandwidth and upgrade options for a system.

The count of physical memory slots available on a device for installing RAM modules. It indicates how many separate memory sticks can be installed or upgraded.

The form factor of the memory module that a product can accept, such as DIMM or SO‑DIMM. It indicates whether the device uses standard desktop RAM modules (DIMM) or smaller laptop‑style modules (SO‑DIMM).

The maximum operating frequency of a memory module, expressed in hertz (Hz). It indicates how many cycles per second the RAM can perform and is typically reported as MHz or GHz. This value helps users compare performance potential across different memory types and system configurations.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

The pin configuration of the power connector(s) used by a motherboard, expressed as a textual description such as "4 + 8-Pin" or "4-Pin x 2". It indicates how many pins are present in each connector and whether multiple connectors are required for proper operation.

Indicates whether a graphics card or motherboard can operate with more than one GPU simultaneously, and if so, which multi‑GPU technologies are supported (e.g., CrossFire, NVLink). The value is typically a textual description of the supported configuration.

A list of the maximum data transfer rates that a network interface can support, expressed in bits per second or common abbreviations such as Gbps or Mbps. Each value indicates a speed that the device is capable of achieving over a wired connection.

Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.

The total count of power connector pins available on an EATX (Extended ATX) motherboard. This value indicates how many separate power connections can be supplied to the board, which is useful for determining compatibility with power supplies and ensuring adequate power delivery.

Indicates whether a product has integrated RGB lighting that can be controlled directly from the board or motherboard, and if so, which software or firmware interface is used (e.g., Aura Sync, Mystic Light, RGB Fusion). This attribute helps users identify compatibility with RGB management tools and understand how to customize lighting effects.

A list of operating system names and versions that the product can run or support, including specific architectures when relevant. Each value represents a distinct OS that is compatible with the hardware or software.

The total count of physical PCI Express x1 expansion slots available on a device, indicating how many single‑lane interfaces can be used for peripherals such as low‑power graphics cards or add‑on modules.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

A comma‑separated list of the RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, and special modes like JBOD. Each entry represents an independent configuration option available to the user.

Represents the total count of RJ‑45 Ethernet interfaces present on a product. Each port can accept a standard Ethernet cable for wired network connectivity.

Indicates whether the product includes a SATA III interface for connecting storage devices such as hard drives or SSDs. A value of "Yes" means the device has at least one SATA III port, while "No" indicates it does not.

Indicates whether the product includes a SATA interface for connecting storage devices. A value of "Yes" means the device has at least one SATA port, while "No" indicates it does not.

Indicates whether the product’s audio functionality has been bypassed or omitted during testing. A value of "Yes" means the audio test was intentionally skipped, while "No" indicates that the audio subsystem was evaluated.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

The SMBIOS (System Management BIOS) version indicates the firmware revision that provides system information to the operating system and management tools. It is typically expressed as a numeric or alphanumeric string such as "2.7" or "3.1", and it helps users verify compatibility, update requirements, and support for hardware features.

The total count of Thunderbolt interfaces available on the product, indicating how many separate Thunderbolt connections it supports.

Indicates whether the memory modules in the product are unbuffered (non‑registered). A value of "Yes" means the device uses standard unbuffered RAM, while "No" indicates that buffered or registered memory is used.

Indicates whether the product includes a USB 3.0 interface, allowing faster data transfer speeds compared to earlier USB standards.

Indicates whether the product includes a USB 3.1 interface, allowing faster data transfer rates compared to earlier USB standards. A value of "Yes" means the device has at least one USB 3.1 port; "No" indicates it does not.

Represents how many USB connectors are available on the product. The value is a simple integer indicating the total count of USB ports, regardless of type or version.

Indicates whether the product includes a VGA (Video Graphics Array) port for analog video output. A value of "Yes" means the device has a VGA connector; "No" indicates it does not.

Indicates whether the device can be powered on remotely via Wake‑on‑LAN, allowing a network administrator or user to start it from sleep or off state using a network packet.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

Indicates whether a product has built‑in wireless networking capability, allowing it to connect to Wi‑Fi networks without requiring an external adapter or dongle.