ASUSTOR AS7008T Intel Core i3 NAS

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates whether a device has the capability to create backups of its data or settings, allowing restoration in case of loss, failure, or interruption.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as an integrated monitor on a laptop or a built-in display on appliances. A value of "Yes" means the device has such a display; a value of "No" means it does not.

The interface or communication bus that a component uses to connect with other parts of a system, such as PCI Express, USB, SATA, or legacy buses like FSB and QPI. It indicates the protocol and physical connection used for data transfer between devices.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Indicates whether the processor in the device is certified as conflict‑free, meaning it has been tested and confirmed to operate without conflicts or incompatibilities with other system components. A value of "Yes" means the processor meets the conflict‑free standard; "No" indicates it does not.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.

Indicates whether the processor in a device supports Error Correcting Code (ECC) memory, allowing detection and correction of single-bit errors during data storage or transfer.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Maximum theoretical speed at which a device can send or receive data over its Ethernet LAN interface, expressed in megabits per second (Mbps) or gigabits per second (Gbps). It represents the upper bound of throughput under optimal conditions and is useful for comparing network performance between devices with wired connectivity.

Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.

The minimum feature size that can be etched onto a semiconductor chip, expressed in nanometers (nm). It indicates the manufacturing technology generation and influences performance, power consumption, and integration density of the processor.

A list of the HDMI ports available on the product, each entry indicating the number of ports and their specific HDMI version or additional features (e.g., "2 x HDMI 2.0b", "1 x HDMI 1.4 with CEC"). This attribute helps users understand both the quantity and capabilities of the HDMI connections.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether the product’s drive bays support hot‑swap, meaning drives can be inserted or removed while the device is powered on without shutting down or rebooting.

Indicates whether the processor is compatible with the Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the processor includes Intel’s Enhanced Halt State feature, which allows the CPU to enter a low‑power idle mode when not actively executing instructions, thereby reducing energy consumption without compromising performance.

The version number of Intel’s Stable Image Platform Program (SIPP), indicating the specific release of the platform that a product supports. It is typically expressed as a decimal value (e.g., 0.00, 1.00) and helps users identify compatibility with Intel’s image stability features.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates whether the product supports Intel’s virtualization technology, which enables efficient execution of virtual machines by providing hardware‑assisted features such as VT‑x and VT‑d for CPU instruction set extensions.

Indicates whether the product supports Intel Virtualization Technology for Directed I/O, a feature that enables efficient virtualization of input/output operations by allowing virtual machines to directly access hardware devices.

Indicates whether the product’s processor supports the Intel® Advanced Encryption Standard (AES) instruction set, which enables faster and more efficient cryptographic operations.

Indicates whether the processor supports Intel® Hyper‑Threading Technology, allowing each physical core to handle multiple execution threads simultaneously for improved multitasking performance.

Indicates whether the product incorporates Intel® InTru™ 3D technology, a feature that enables efficient generation and rendering of three‑dimensional content with improved performance and visual quality.

Indicates whether the product incorporates Intel Quick Sync Video, a hardware‑accelerated video processing feature that enables faster encoding and decoding of common formats such as H.264, H.265, and VP9 while reducing power consumption.

The maximum operating frequency that a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

Indicates whether the product can stream video and audio wirelessly to a compatible display or receiver using technologies such as Miracast, Intel Wi‑Display, or similar protocols. A value of "Yes" means the device has the necessary hardware and software support; "No" means it does not.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

The maximum amount of dedicated video memory that the integrated graphics adapter built into a device can provide, expressed as a data size (e.g., megabytes or gigabytes). This value indicates how much graphical processing power is available for rendering, gaming, and other GPU‑intensive tasks.

Cantidad total de líneas (lanes) de la interfaz PCI Express disponibles en un dispositivo o placa base. Cada línea permite el flujo de datos entre el procesador y los dispositivos conectados, por lo que este número indica la capacidad máxima de ancho de banda para tarjetas y periféricos compatibles con PCIe.

The largest amount of digital storage that a product can accommodate, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates the upper limit of data capacity for the device and helps users compare how much information it can hold.

The maximum rate at which a processor can transfer data to or from its memory subsystem, expressed as a data transfer speed (e.g., GB/s). It indicates the throughput capacity of the CPU’s memory interface and helps users compare performance potential across different processors.

The total count of independent memory channels supported by a processor or motherboard, indicating how many separate memory paths can be used simultaneously. This value helps users understand the potential for parallel memory access and overall system performance.

The clock speed at which the integrated graphics processor runs under normal conditions, expressed in hertz (Hz). It indicates how many cycles per second the GPU performs and is useful for comparing visual performance across devices that use an on‑board graphics solution.

The version number of the DirectX graphics API supported by a device, indicating its compatibility with graphical features and software that rely on specific DirectX releases.

The operating speed at which the integrated graphics processor in a device runs, expressed in hertz (Hz). It indicates how many cycles per second the GPU can perform and is used to assess visual performance, power consumption, and compatibility with display refresh rates.

The unique identifier of the integrated graphics adapter built into a device, typically expressed as a hexadecimal string such as "0x5916" or a numeric code like "1916". This value allows users and systems to distinguish between different GPU models and versions across laptops, desktops, and motherboards.

A textual description of how PCI Express lanes are distributed across the available slots or interfaces in a device. The value typically lists groups of lanes separated by commas, where each group may contain a number of lanes and optional ‘+’ signs to indicate combined lanes that share the same speed (e.g., "1x16", "2x8", "1x8+2x4"). This attribute helps users understand the bandwidth capacity and compatibility of expansion slots.

The unique numeric identifier assigned by Intel to each processor model, used for precise identification and lookup of technical specifications.

The amount of internal memory reserved for a processor’s cache, expressed in units such as megabytes (MB) or gigabytes (GB). This value indicates how much data the CPU can store locally to accelerate access and improve performance.

Indicates the level or category of a processor’s internal cache memory, such as L1, L2, L3, or Smart Cache. This attribute helps users understand the hierarchy and accessibility of cached data within the CPU, which can influence performance characteristics.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The set of instruction set architectures or execution modes that a processor can operate in, such as 32‑bit or 64‑bit. This attribute lists the supported modes for the CPU and helps users determine compatibility with software that requires a specific bitness.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

A comma‑separated list of RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, JBOD, and other proprietary configurations. Each value represents a distinct RAID mode the system is capable of creating or managing.

The processor stepping code identifies the specific revision of a CPU model, indicating changes in manufacturing that may affect performance, power consumption or compatibility. It is used to distinguish between different silicon revisions within the same product line.

List of physical or logical interfaces that allow a storage drive to connect with other components, such as SATA, M.2 PCIe, U.2, SAS, NVMe or other standard connections.

The physical width of a storage drive measured in inches or millimetres, typically expressed as the diagonal size of the drive’s enclosure (e.g., 2.5" or 3.5"). This measurement indicates the form factor that determines compatibility with computer bays, external enclosures, and mounting brackets.

The total count of individual storage devices (hard disk drives or solid‑state drives) that are physically present in the product. It indicates how many separate drives are installed, regardless of capacity or interface type.

The total count of physical slots or bays in a device that can accommodate storage drives such as hard disks or solid‑state drives. This value indicates how many separate drives the product can house, helping users assess expansion capacity and configuration options.

A list of the types of storage drives that a product can use, such as HDD or SSD. Each entry indicates a distinct drive type supported by the device, allowing users to understand which internal or external storage media are compatible.

The maximum amount of power, expressed in watts (W), that a processor or other electronic component is designed to dissipate as heat under typical operating conditions. It represents the thermal load the cooling system must handle and is used by manufacturers and users to assess performance, energy consumption, and suitability for specific environments.

A short alphanumeric code that identifies the thermal solution or cooling configuration used in a computer component such as a processor, motherboard, or chassis. The identifier is typically assigned by the manufacturer and can be referenced to determine compatibility, performance characteristics, or warranty information for the cooling system.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.