D-Link DGS-1210-08P network switch Managed L2 Gigabit Ethernet

Sponsored  This site contains affiliate links for which we may receive compensation. More information
Identifiers
Model D-Link DGS-1210-08P
MPN D-Link DGS-1210-08P
Dimensions / Weight
Key Features
10g support
Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.
Yes
AC input frequency
The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.
50 - 60 Hz
AC input voltage
The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.
100 - 240 V
Access Control List ACL
Indicates whether the product supports an Access Control List (ACL) feature, allowing administrators to define rules that permit or deny network traffic based on criteria such as IP address, port number, or protocol.
Yes
Aspect ratio
The proportion between the width and height of a display, image or video, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether content is designed for widescreen, square, or other aspect ratios.
4:3
Basic switching RJ-45 Ethernet ports quantity
Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.
8
Battery capacity 8400 mAh
Battery cells
The count of individual electrochemical cells that make up a battery pack. This number indicates how many separate cells are connected in series or parallel to provide the required voltage and capacity for the device.
9
Battery technology
The chemical composition or classification of a battery, such as lithium‑ion, lithium‑polymer, nickel‑metal hydride, sealed lead acid, alkaline, zinc‑air, etc. It indicates the type of electrochemical reaction that stores and delivers energy in the device.
Lithium-Ion (Li-Ion)
Battery voltage
The electrical potential difference supplied to or measured across a battery’s terminals, expressed in volts (V). It represents the battery’s nominal operating voltage and is used to match power sources, chargers, and devices that require a specific voltage level.
10.8 V
Brand compatibility
A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.
OKI
Budget poe
The highest electrical power, expressed in watts (W), that a device can supply to connected equipment at any given time. It represents the total PoE budget available for powering attached devices such as switches, access points, or cameras.
45 W
Built-in camera
Indicates whether the product includes a built‑in camera that can capture images or video directly, without requiring an external device. A value of "Yes" means the device has such a camera; "No" means it does not.
No
Built-in speakers
Indicates whether the product includes built‑in speaker(s) that can produce sound without requiring external audio devices. A value of "Yes" means the device has one or more integrated speakers; a value of "No" means it does not.
Yes
Cable length
The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.
5 m
Cable Lock Slot
Indicates whether the product includes a slot for inserting a cable lock, such as a Kensington or similar security device.
Yes
Cable management
Indicates whether the product includes a built‑in system for organizing, routing, or securing cables. The value can be "Yes" when a cable management feature is present, "No" when it is absent, or a descriptive term such as "Cable Inlay System (CIS)" or "Cable Management System (CMS)" that specifies the type of integrated solution.
Yes
Cable shielding
The type of electromagnetic shielding applied to a cable or its connector, indicating whether the cable is unshielded, shielded with foil, braided, or uses a combination such as UTP, FTP, S‑FTP, or other common configurations. This attribute helps users identify compatibility with devices that require specific shielding levels.
U/UTP (UTP)
Cables included
A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.
AC, AUX, DVI, USB, RS-232, VGA
Case colour
The colour or combination of colours that a product’s outer shell or enclosure is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the case for consumers.
Black / Metalic Grey
Certification
A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.
CE Class A
Colour
The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.
Black
Compatible products
A list of product names that are known to work with or be supported by this item, such as models, series, or specific configurations. Each entry represents a distinct product that can be used interchangeably or in conjunction with the current product.
ASUS X301/X401/X501
Connector gender Male/Male
Contrast ratio
The contrast ratio is the proportion between the brightest and darkest luminance a display can produce, expressed as a simple ratio such as 1000:1. It indicates how well a screen can differentiate light from dark areas, affecting image clarity and color depth.
700:1
Data link protocols
A comma‑separated list of network communication protocols that a device can use or support at the data link layer, such as Ethernet variants (Fast, Gigabit), Fibre Channel, and other link‑level standards. Each protocol is represented by its standard name and may be separated by commas or slashes in the source data.
IP
Depth
The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.
180 mm
DHCP features
A comma‑separated list of the DHCP roles and options that a device can provide or use, such as server, client, relay, snooping, option 82 support, and IPv6 variants. The value may contain multiple items for a single product.
DHCP server,DHCP client
Display TN+Film
Display diagonal 38 cm
Display number of colours
The total count of distinct colours that a display can render, typically expressed as a numeric value (e.g., 16.78 million). This attribute indicates the colour depth and richness of the visual output; higher numbers generally mean more accurate and vibrant images.
16.78 million colours
Display resolution
The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.
1024 x 768 pixels
Display technology
The type of display panel used in a visual device, such as LED‑backlit LCD, IPS, TN, VA, OLED, or AMOLED. It indicates the underlying technology that determines image quality, color accuracy, viewing angles, response time and power consumption.
TN
Display type
The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.
LED
DVI-D ports
Represents how many DVI‑D connectors are present on the product. The value is a simple integer indicating the total count of DVI‑D ports, regardless of version or configuration.
1
Flow control support
Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.
Yes
Form factor
Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.
Network Switch
Full Duplex
Indicates whether the product can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.
Yes
Full duplex
Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.
Yes
Head-of-line HOL blocking
Indicates whether the product implements mechanisms to prevent head‑of‑line (HOL) blocking, a network performance issue where a single packet or flow delays subsequent traffic on the same path. A value of "Yes" means the device includes such mitigation features; "No" indicates it does not.
Yes
Height
The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.
44 mm
Horizontal scan range
The range of frequencies, expressed in kilohertz (kHz), over which a device can process or display horizontal signals or scan lines. It indicates the minimum and maximum operating frequencies for horizontal scanning operations.
31.5 - 60.2 kHz
IGMP snooping Yes
Jumbo frames support Yes
LAN Ports Speed
The maximum network transfer rates supported by the device’s LAN ports, expressed as common speed abbreviations such as "10/100", "10/100/1000" or "10GbE". Each value represents a distinct speed that the port can negotiate during operation.
10/100/1000
LED backlight
The illumination source used behind a display panel, such as LED, WLED, CCFL or LCD. It determines the brightness, energy efficiency and color accuracy of the screen.
Yes
LED indicators
A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.
Yes
MAC address filtering
Indicates whether the device supports filtering network traffic based on MAC addresses. When enabled, the device can allow or block communication for specific devices identified by their MAC address.
Yes
MAC address table
The total count of unique MAC addresses that the device can store in its forwarding table. This value indicates how many devices can be simultaneously connected before the switch must start discarding or aging out older entries.
16000 entries
Management protocols
A list of network protocols that a device can use for configuration, monitoring and remote management, such as SNMP, HTTP/HTTPS, Telnet, SSH or other standard interfaces. Each protocol is represented by its common name and may be separated by commas or slashes in the source data.
SNMP, RMON
Multicast support
Indicates whether the device can send or receive IP multicast traffic, allowing it to participate in group communications such as streaming media, IPTV, and certain network protocols that rely on multicast distribution.
Yes
Necessary voltage AC 120/230 V (50/60 Hz)
Networking standards
A list of the networking protocols and standards that a device can support or comply with, such as IEEE 802.11 variants for wireless, IEEE 802.3 for Ethernet, or other relevant networking specifications. The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.
IEEE 802.1D,IEEE 802.1w,IEEE 802.3ad,IEEE 802.3af
Number of speakers
The total count of individual speaker units included in the product. It indicates how many separate speakers are present, whether built‑in or external, and helps users compare audio capabilities across models.
2
Operating humidity 10 to 95 %
OSD Languages
A list of natural languages that can be displayed on the screen‑on‑display (OSD) interface of a device, such as a monitor or TV. Each entry represents a language option available for menu navigation, subtitles, and other on‑screen text.
English, Spanish, Italian, Simplified Chinese, Japanese, Traditional Chinese, French, German
Package depth
The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.
331 mm
Package Height
The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.
72 mm
Package type
The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.
Box
Package width
The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.
288 mm
Packet buffer memory
The amount of temporary storage that a device allocates in its internal memory for buffering data before processing or forwarding it. Expressed as a digital capacity (e.g., kilobytes, megabytes), this value indicates how much information the hardware can hold at once and influences performance when handling high‑throughput or bursty traffic.
6 MB
Packet transfer speed
The maximum rate at which a device can transmit or receive network packets, expressed as the number of packets processed each second. This value indicates the throughput capability of the device under optimal conditions and is useful for comparing performance across networking equipment.
14.9 Mp/s
Page yield
The number of pages a printer or printing device can produce before the ink, toner, or other consumable needs replacement under normal operating conditions.
38000 pages
Pallet length
The linear dimension of a pallet measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of pallets across different products and logistics contexts.
110 cm
Pallet width
The horizontal measurement of a pallet, expressed in a linear unit such as millimetres or inches. It indicates how wide the pallet is from one side to the other and helps customers assess fit for storage, shipping, or display.
120 cm
Pixel pitch
Represents the physical dimensions of a single pixel on a display or imaging device, expressed as width and height in a length unit (e.g., millimeters). This attribute allows comparison of the physical resolution across screens, cameras, and other pixel‑based technologies.
0.297 x 0.297 mm
Plug and play
Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.
Yes
Power adaptor type
The classification of the power adaptor used with a device, indicating whether it is external or internal, its electrical interface (AC, DC, USB‑Charging, etc.), and any specific form such as integrated or travel adapters. This attribute helps buyers understand how the device receives power and what kind of connector or cable is required.
Internal
Power consumption 60 W
Power LED Yes
Power over Ethernet PoE PoE
Power Supply Type
The type of electrical supply used by the product, such as AC mains, DC power, USB power, battery, or a combination of these options.
AC
Print technology Laser
Purpose
The primary purpose of a product, indicating its main intended use or target market segment (e.g., "Gaming", "Office", "Travel"). It helps customers quickly identify whether the item matches their needs and can be used for filtering or categorization across different product categories.
Notebook/Tablet
Quality of Service support
Indicates whether a product supports Quality of Service (QoS) features, which allow prioritization and management of network traffic to ensure optimal performance for critical applications.
Yes
Rack mounting
Indicates whether a product is designed to be mounted in a rack system. The value can be "Yes" or "No", or it may specify the height occupied by the device using rack units (U) such as "1U", "2U", or a numeric measurement with unit, e.g., "61.25 mm".
Yes
RJ-45 ethernet ports type
Indica los estándares o velocidades que soportan los puertos RJ‑45 presentes en el producto, como Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps) o 10 Gigabit Ethernet. Cada valor describe una capacidad específica del conector y permite comparar la compatibilidad de red entre dispositivos.
1000 )
Safety
A list of safety and regulatory certifications that a product complies with, such as CE, UL, FCC, or other regional standards.
cUL, LVD
Spanning Tree Protocol
A network protocol that prevents loops in Ethernet topologies by dynamically blocking and forwarding paths, ensuring a loop‑free logical topology. The value indicates whether the device implements this protocol (e.g., "Yes" or "No").
Yes
Spanning tree protocol
Indicates whether the device implements the Spanning Tree Protocol (STP), a network protocol that prevents loops in Ethernet topologies by dynamically blocking and forwarding paths to maintain a loop‑free logical topology.
Yes
SSH/SSL support
Indicates whether the device can establish secure connections using SSH or SSL protocols, allowing encrypted remote management and data transfer.
Yes
Switch type
The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.
Managed
Switching capacity
The maximum data transfer rate that the device can handle, expressed as a numeric value with an appropriate unit such as Gbit/s or Mbit/s. This attribute indicates how quickly data can be transmitted through the device and helps users compare networking performance across products.
20 Gbit/s
Touch technology
The method by which a device’s touch-sensitive display detects user input, such as multi‑touch, single‑touch, capacitive, resistive, infrared or optical. This attribute indicates the specific interaction technology employed in the screen.
Multi-touch
Touchscreen type
The technology used by a device’s touch-sensitive display, such as capacitive, resistive, infrared, or optical. It indicates how the screen detects user input and can affect sensitivity, durability, and power consumption.
Tabletop
Type
The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.
Laser cartridge
Vertical scan range
The range of vertical scan frequencies that a display device can support, expressed in hertz (Hz). It indicates the minimum and maximum refresh rates at which the screen updates vertically, affecting visual smoothness and stability.
56 - 75 Hz
VESA Mounting
Indicates whether a product supports the VESA mounting standard, which defines the size and placement of mounting holes on displays or monitors. The value can be "Yes" or "No", or it may specify one or more VESA patterns such as "100 × 100 mm" to indicate the exact dimensions supported.
Yes
VESA mounting interfaces
Indicates the dimensions of VESA mounting patterns supported by the product, expressed as pairs of horizontal and vertical measurements in millimetres (e.g., "100×100 mm"). The value may be a single pattern or a comma‑separated list of multiple compatible sizes.
100 x 100 mm
VLAN support
Indicates whether the device can configure and manage Virtual LANs (VLANs) for network segmentation and traffic isolation. A value of "Yes" means the product supports VLAN tagging, creation, and management; a value of "No" indicates it does not provide this capability.
Yes
Wall mountable
Indicates whether the product can be securely mounted to a wall or other vertical surface using standard mounting hardware.
Yes
Weight
The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.
4.8 kg
Width
The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.
280 mm
D-Link

D-Link is a Taiwanese networking equipment manufacturer that produces a wide range of products for the consumer, small business, and enterprise markets. Some of their most popular products include wireless routers, switches, and network attached storage devices. D-Link has a strong reputation for quality and reliability, and their products are often praised for their feature-richness and ease of use.