D-LINK UNMANAGED LAYER 2 SWITCH 24 PORT 10/100 INT PSU UK

Indicates the total count of physical RJ‑45 Ethernet connectors available on a device for wired network connectivity. The value is an integer representing how many separate ports can be used to connect Ethernet cables.

A list of regulatory, environmental, safety and quality certifications that a product meets. Each entry represents an individual certification or standard such as RoHS, CE, FCC, IEC, UL, etc.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The maximum theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

The total count of unique MAC addresses that the device can store in its forwarding table. This value indicates how many devices can be simultaneously connected before the switch must start discarding or aging out older entries.

The maximum number of MAC address entries that a networking device can store in its forwarding table. This value indicates the capacity of the switch or hub to learn and forward traffic based on MAC addresses, affecting how many unique devices can be connected before the table must be refreshed or overflowed.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The highest temperature at which a product can operate safely without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C). This attribute helps users verify that the device will remain within its thermal limits during normal use.

The highest temperature at which a product can safely operate without risk of damage or performance degradation. The value is expressed in degrees Celsius (°C) and represents the upper limit of the device’s thermal tolerance.

The lowest temperature at which a product can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius (°C) and may represent a single temperature, a minimum–maximum interval, or an average operating point.

The lowest temperature at which a storage device can safely operate without risk of damage or performance degradation. Values are expressed in degrees Celsius and may represent a single temperature, a minimum–maximum interval, or an average operating point.

A list of the networking protocols and standards that a device can support or comply with, such as IEEE 802.11 variants for wireless, IEEE 802.3 for Ethernet, or other relevant networking specifications. The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

The range of relative humidity, expressed as a percentage, within which the product is designed to operate reliably. Values are given as a minimum–maximum interval such as "20-80%" and indicate the acceptable environmental moisture level for optimal performance.

The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.

The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.

The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.

The linear dimension of a pallet measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of pallets across different products and logistics contexts.

The horizontal measurement of a pallet, expressed in a linear unit such as millimetres or inches. It indicates how wide the pallet is from one side to the other and helps customers assess fit for storage, shipping, or display.

A concise description of a device’s operating characteristics, such as power consumption, data transfer rate, volume flow, or other quantitative metrics that indicate how the product performs in its intended function. The value may be expressed as a number with units (e.g., watts, gigabits per second), a range, or a textual summary.

A list describing the physical connectors or interfaces present on a product, including their type (e.g., USB, RJ‑45, HDMI) and the quantity for each type. Each entry is a short phrase such as "4 x USB 3.0" or "2 x RJ‑45", allowing users to see at a glance what ports are available and how many of each. This attribute captures both the port category and its count in a single string, making it suitable for products that offer multiple port types with varying numbers.

A list of the operational states that an LED indicator on a device can show, such as power status, activity, link, or other functional signals. Each entry represents a distinct status that the LED may display when the device is in use.

The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.

The physical form factor that indicates whether the device is designed for desktop use, rack‑mountable in a standard 19‑inch rack (e.g., 1U), or both. It helps buyers determine how to install and space the product within their environment.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.