Patriot Burst 120GB 2.5” Solid State Drive

The maximum number of input/output operations per second that a storage device can perform when reading data in 4‑KB blocks. This metric indicates how quickly the device can retrieve small, non‑sequential pieces of information and is useful for evaluating performance in database or high‑transaction workloads.

The amount of internal memory reserved as a cache within a device or component, expressed in a data size such as megabytes (MB) or gigabytes (GB). It represents the temporary storage used to accelerate read/write operations by holding frequently accessed data closer to the processor or controller.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The highest theoretical speed at which a device can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. It represents the upper bound of throughput under optimal conditions and is useful for comparing performance across devices and interfaces.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The total amount of digital storage that a disk drive—whether internal or external—can hold, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute helps users understand how much data can be stored on the device and compare different drives.

The physical size or shape of a storage disk, indicating the dimensions and mounting format used in computers and other devices. Common values include standard sizes such as "3.5" in., "2.5" in., and form‑factor codes like "M.2 2280" or "mSATA". This attribute helps users identify which drives are compatible with a given enclosure, motherboard, or system.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

A list of the physical or logical interfaces that a product can use to connect with other devices or components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, and similar standards.

The vertical dimension of a master carton measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any packaging where the overall height of the outer carton is relevant.

The linear dimension of a master carton measured in a standard unit such as millimetres, centimetres or inches. It represents the overall length from one side to the other and is used to assess packaging capacity, shipping requirements and compatibility with palletisation systems.

The mass of a master carton expressed in a standard unit such as grams or kilograms. It represents how heavy the packaging unit is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a master carton, expressed in a linear unit such as millimetres or inches. It indicates how wide the outermost packaging is from one side to the other and helps determine shipping volume, palletisation, and compatibility with handling equipment.

The average time interval between successive failures of a product or component, expressed in hours or other standard time units. It indicates the expected reliability and durability of the item under normal operating conditions.

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

The electrical voltage that a device is designed to operate at, expressed in volts (V). It may represent a single nominal value or a range indicating the minimum and maximum supply voltages compatible with the product. This attribute helps users verify that their power source matches the device’s requirements.

The form of packaging used for a product, such as box, blister pack, bag, or pallet. It indicates how the item is contained and protected during shipping and storage.

The total count of individual product units contained within a single master carton. This value indicates how many pieces are packaged together in one master carton, helping buyers and logistics planners estimate shipping volume, inventory needs, and packaging costs.

The highest rate at which a storage device can retrieve data, expressed in bits per second or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can read information for processing or transfer.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

The total amount of data that can be stored on a solid‑state drive (SSD) installed in the product, expressed as a numeric value with an appropriate unit such as GB, MB, or TB. This attribute indicates how much information the device can hold and helps users compare storage options across products.

The length of time for which the manufacturer guarantees that the product will be free from defects in materials and workmanship, typically expressed in years or months.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

The maximum rate at which a device can write data to storage or memory, expressed in bits per second (bps) or commonly used abbreviations such as MB/s or GB/s. This value indicates how quickly the device can transfer information for writing operations and is useful for comparing performance across models.