Phaser 6180 MFP Fuser Assembly

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates whether a device is equipped with an ambient light sensor that detects the intensity of surrounding light to adjust display brightness or other functions.

The total amount of electrical energy a product consumes in one year, expressed in kilowatt‑hours (kWh). This figure represents the expected yearly operating cost and allows consumers to compare the long‑term efficiency of appliances or electronics.

A list of audio codecs and file formats that the product can play or output, such as AAC, MP3, FLAC, Dolby Digital, DTS, etc. Each value represents a supported combination of compression technology and file extension.

Indicates whether the product comes with batteries included in the package. A value of "Yes" means that batteries are supplied, while a value of "No" indicates that no batteries are provided and must be purchased separately.

The linear measurement of the outer edge or frame surrounding a display, screen, or other product component, expressed in millimetres or inches. It indicates how wide the bezel is from one side to the other and helps customers assess fit, aesthetics, and compatibility with mounting brackets or protective cases.

The linear measurement of the bottom edge of a display or device’s bezel, expressed in millimetres or inches. It indicates how wide the lower frame is from one side to the other and helps customers assess fit, compatibility with mounting brackets, and overall design aesthetics.

The linear measurement of the bezel’s side edge on a display or similar product, expressed in millimetres or inches. It indicates how wide the bezel is from one side to the other and helps customers assess fit, aesthetics, and compatibility with mounting brackets or protective cases.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

Indicates whether the product includes built‑in speaker(s) that can produce sound without requiring external audio devices. A value of "Yes" means the device has one or more integrated speakers; a value of "No" means it does not.

The total number of integrated speaker units present in the product. This value indicates how many separate speaker elements are built into the device, helping users compare audio capabilities across models.

The maximum frequency at which a system bus can transfer data, expressed in hertz (Hz). It indicates the theoretical throughput capability of the bus and allows users to compare performance across different processors or components.

The interface or communication bus that a component uses to connect with other parts of a system, such as PCI Express, USB, SATA, or legacy buses like FSB and QPI. It indicates the protocol and physical connection used for data transfer between devices.

The interface speed or bandwidth specification of a computer component, such as a processor or memory bus. Common units include GT/s (giga‑transfers per second) for PCIe lanes and MHz for clock frequencies. It indicates the maximum data transfer rate that the component can achieve under ideal conditions.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

The total amount of space or volume that a product can hold, expressed in an appropriate unit such as GB, MB, TB for digital storage or L, ml, cl for liquid capacity. This attribute helps users compare how much content a device or container can accommodate.

Indicates whether the device includes a built‑in card reader that can read removable memory cards such as SD, microSD, MMC or similar formats.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

List of the memory card types that a device can read or write, such as MicroSD (TransFlash), SD, MMC, CompactFlash, and others. Each value represents a format that the device’s slot or reader supports for storage expansion.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The total count of component (YPbPr) video input ports available on the device, indicating how many separate analog video signals can be connected simultaneously.

The overall computer system or platform that the product belongs to, such as a desktop PC, laptop, server, or embedded device. It indicates the general type of hardware architecture and intended use case for the product.

Indicates whether the processor in the device is certified as conflict‑free, meaning it has been tested and confirmed to operate without conflicts or incompatibilities with other system components. A value of "Yes" means the processor meets the conflict‑free standard; "No" indicates it does not.

The contrast ratio is the proportion between the brightest and darkest luminance a display can produce, expressed as a simple ratio such as 1000:1. It indicates how well a screen can differentiate light from dark areas, affecting image clarity and color depth.

Indicates whether the product comes with a cooling solution included in its package. A value of "Yes" means a cooler (air, liquid, or passive) is supplied; a value of "No" means no cooler is provided and must be purchased separately.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

The visual style or aesthetic category of a product, such as "Digital signage flat panel", "Modern", "Retro", or "Sporty". It describes the overall look and feel that distinguishes the item from others in its class.

A list of device categories or models that the product is compatible with, such as printers, scanners, tablets, laptops, and other electronic devices. Each value represents a distinct type of hardware or system that can be used with the product.

List of physical or logical interfaces that a device can use to connect with other components, such as USB, PCI Express, SATA, Ethernet, Thunderbolt, DisplayPort, and similar technologies. Each value represents an interface standard supported by the device.

The total count of distinct colours that a display can render, typically expressed as a numeric value (e.g., 16.78 million). This attribute indicates the colour depth and richness of the visual output; higher numbers generally mean more accurate and vibrant images.

The pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates how many pixels are used to render visual content and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

The type of visual panel or display technology used in a product, such as LCD, LED, OLED, TFT, IPS, AMOLED, or analog. It indicates the underlying technology that determines image quality, color reproduction, power consumption and suitability for different use cases.

Indicates whether the processor in a device supports Error Correcting Code (ECC) memory, allowing detection and correction of single-bit errors during data storage or transfer.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

The energy efficiency class indicates the relative energy performance of a product, expressed with letters ranging from A+++ (most efficient) to G (least efficient). It allows consumers to compare expected operating costs and environmental impact across similar items.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Maximum theoretical speed at which a device can send or receive data over its Ethernet LAN interface, expressed in megabits per second (Mbps) or gigabits per second (Gbps). It represents the upper bound of throughput under optimal conditions and is useful for comparing network performance between devices with wired connectivity.

Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.

Represents the count of independent execution units within a processor or similar component. The value is an integer without any unit of measure, indicating how many discrete execution cores or threads are available for parallel processing.

Indicates whether the device includes a built‑in fingerprint reader for biometric authentication. A value of "Yes" means the device has a functional fingerprint reader; "No" indicates it does not.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The specific model or designation of the graphics adapter present in a device, such as "Intel HD Graphics", "AMD Radeon Vega 8", or "NVIDIA GeForce GTX 1660". This value helps users understand the visual performance and capabilities that the product can deliver.

Indicates whether a handheld device can be operated from a distance using an external remote control such as infrared, Bluetooth or Wi‑Fi. A value of "Yes" means the product supports remote operation; "No" indicates it does not.

The pixel dimensions of a product’s screen, expressed as width by height (e.g., 1920x1080). It indicates the total number of pixels that compose the display and is used to assess image sharpness and clarity across devices such as monitors, TVs, laptops, and cameras.

Indicates whether a device supports HDCP (High‑bandwidth Digital Content Protection), allowing it to play or display protected digital content on compatible screens and audio/video equipment.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The range of frequencies, expressed in kilohertz (kHz), over which a device can process or display horizontal signals or scan lines. It indicates the minimum and maximum operating frequencies for horizontal scanning operations.

A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.

A list of the file extensions and codecs that a product can read, display, or record. Each value represents a valid format such as JPG, PNG, BMP, GIF, HEIF, WebP, RAW, etc., and may include both the extension and the associated codec name.

Indicates whether the processor is compatible with the Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the product incorporates Intel’s Clear Video HD technology, a hardware feature that enhances video playback and capture quality by providing smoother motion, reduced artifacts, and improved color accuracy.

Indicates whether the processor includes Intel’s Enhanced Halt State feature, which allows the CPU to enter a low‑power idle mode when not actively executing instructions, thereby reducing energy consumption without compromising performance.

Indicates whether the product is compatible with Intel Optane memory, a technology that accelerates storage performance by caching frequently accessed data in high‑speed non‑volatile memory.

Indicates whether the product incorporates Intel Software Guard Extensions (SGX), a hardware feature that provides isolated execution environments for secure code and data protection.

The version number of Intel’s Stable Image Platform Program (SIPP), indicating the specific release of the platform that a product supports. It is typically expressed as a decimal value (e.g., 0.00, 1.00) and helps users identify compatibility with Intel’s image stability features.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates the specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by a processor, which determines its capability for efficient transaction processing and concurrency control.

Indicates whether the processor supports Intel Turbo Boost Max Technology 3.0, a feature that dynamically selects the fastest cores for peak performance and improves efficiency during demanding workloads.

Indicates whether the product supports Intel’s virtualization technology, which enables efficient execution of virtual machines by providing hardware‑assisted features such as VT‑x and VT‑d for CPU instruction set extensions.

Indicates whether the product supports Intel Virtualization Technology for Directed I/O, a feature that enables efficient virtualization of input/output operations by allowing virtual machines to directly access hardware devices.

Indicates whether the product’s processor supports the Intel® Advanced Encryption Standard (AES) instruction set, which enables faster and more efficient cryptographic operations.

Indicates whether the product incorporates Intel’s Clear Video HD technology, a hardware acceleration feature that improves video playback and capture quality by optimizing decoding and rendering pipelines.

Indicates whether the processor supports Intel® Hyper‑Threading Technology, allowing each physical core to handle multiple execution threads simultaneously for improved multitasking performance.

Indicates whether the product incorporates Intel® Identity Protection Technology, a security feature that protects user identities and credentials by providing secure authentication and credential management.

Indicates whether the product incorporates Intel® InTru™ 3D technology, a feature that enables efficient generation and rendering of three‑dimensional content with improved performance and visual quality.

Indicates whether the product incorporates Intel® OS Guard, a security feature that protects the operating system from attacks and ensures software integrity.

Indicates whether the product incorporates Intel Quick Sync Video, a hardware‑accelerated video processing feature that enables faster encoding and decoding of common formats such as H.264, H.265, and VP9 while reducing power consumption.

Indicates whether the product includes Intel Secure Key support, a hardware feature that allows secure generation and storage of cryptographic keys within the processor. Presence of this capability enhances protection against physical attacks and simplifies key management for sensitive data.

Indicates whether the processor incorporates Intel’s Speed Shift technology, which dynamically adjusts CPU frequency and voltage to balance performance and power consumption for improved efficiency.

The maximum operating frequency that a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

Indicates whether the product incorporates Intel® vPro technology, a suite of features that provide enhanced security, remote management, and performance optimization for business environments.

Indicates whether the product includes a key ring attachment or accessory that allows keys to be attached for easy carrying.

The calendar date on which a product was first made available to the public or released for sale. It is expressed in the format YYYY-MM-DD and can be used to filter, sort, or display the launch timeline of the item.

The type of LED backlighting used in a display panel, such as Direct‑LED, Edge‑LED, Full‑Array or other LED configurations. It indicates how the light source is arranged behind the screen to provide illumination and uniformity.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

Indicates whether a product is compatible with Apple Mac computers or macOS operating systems. The value can be "Yes" if the device supports Macs, or "No" if it does not.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The target market segment for a product, such as "Business", "Home", or "Small‑medium business". This attribute helps customers quickly identify the intended user group and typical use case of the item.

The linear dimension of a master carton measured in a standard unit such as millimetres, centimetres or inches. It represents the overall length from one side to the other and is used to assess packaging capacity, shipping requirements and compatibility with palletisation systems.

The mass of a master carton expressed in a standard unit such as grams or kilograms. It represents how heavy the packaging unit is and can be used for shipping calculations, handling instructions, or consumer information.

The largest amount of internal random‑access memory that a device can support, expressed as a data size such as megabytes or gigabytes. It indicates the maximum capacity for active processes and multitasking performance.

The maximum amount of dedicated video memory that the integrated graphics adapter built into a device can provide, expressed as a data size (e.g., megabytes or gigabytes). This value indicates how much graphical processing power is available for rendering, gaming, and other GPU‑intensive tasks.

Cantidad total de líneas (lanes) de la interfaz PCI Express disponibles en un dispositivo o placa base. Cada línea permite el flujo de datos entre el procesador y los dispositivos conectados, por lo que este número indica la capacidad máxima de ancho de banda para tarjetas y periféricos compatibles con PCIe.

The highest pixel resolution and refresh rate that a product can output through its DisplayPort interface, expressed as width × height followed by the maximum supported refresh rate (e.g., 4096x2304@60Hz). This value indicates the best visual performance achievable on displays connected via DisplayPort.

The maximum rate at which a processor can transfer data to or from its memory subsystem, expressed as a data transfer speed (e.g., GB/s). It indicates the throughput capacity of the CPU’s memory interface and helps users compare performance potential across different processors.

The total count of independent memory channels supported by a processor or motherboard, indicating how many separate memory paths can be used simultaneously. This value helps users understand the potential for parallel memory access and overall system performance.

A list of the operating frequencies that a processor can run at, expressed in hertz (Hz). The values are typically given as MHz or GHz and may include multiple speeds separated by commas to indicate base, boost, or other supported clock rates. This attribute helps users compare the performance potential of different CPUs and understand the range of speeds they can achieve under various workloads.

A list of mobile operating systems that the product supports, including specific versions and architectures when relevant. Each value represents a distinct OS that is compatible with the device.

The proportion between the width and height of a screen or image, expressed as two numbers separated by a colon (e.g., 16:9). It indicates whether content is designed for widescreen, square, or other aspect ratios and helps users match devices to their media formats.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

The total count of individual cartons that are stacked or arranged on a single pallet for shipping or storage purposes. It indicates how many separate packaging units fit within one pallet configuration and is used to calculate load capacity, logistics planning, and inventory management.

The total number of distinct languages that can be displayed on the screen‑on‑display (OSD) interface of a device, such as a monitor or TV. It indicates how many language options are available for menu navigation, subtitles, and other on‑screen text, allowing users to choose their preferred language when interacting with the product.

Indicates whether the product has a built‑in or integrated display that can be used to view content directly, such as on laptops, monitors, TVs, projectors, or other electronic devices.

The model name or number of the integrated graphics adapter built into a device, such as a laptop, desktop, or motherboard. It identifies the specific GPU variant used for rendering and video processing, allowing users to compare visual performance and compatibility across products.

Indicates whether the device’s integrated graphics adapter can output a 4K resolution (3840×2160) image or video. A value of "Yes" means the hardware and drivers support 4K playback or rendering; "No" indicates that 4K is not supported.

The clock speed at which the integrated graphics processor runs under normal conditions, expressed in hertz (Hz). It indicates how many cycles per second the GPU performs and is useful for comparing visual performance across devices that use an on‑board graphics solution.

The operating speed at which the integrated graphics processor in a device runs, expressed in hertz (Hz). It indicates how many cycles per second the GPU can perform and is used to assess visual performance, power consumption, and compatibility with display refresh rates.

The unique identifier of the integrated graphics adapter built into a device, typically expressed as a hexadecimal string such as "0x5916" or a numeric code like "1916". This value allows users and systems to distinguish between different GPU models and versions across laptops, desktops, and motherboards.

The specific version of the OpenGL graphics API supported by a device, indicating its rendering capabilities and compatibility with software that relies on this standard.

A comma‑separated list of the video output ports that an integrated or onboard graphics adapter can provide, such as DisplayPort, HDMI, DVI, VGA, or Embedded DisplayPort (eDP). The values indicate which external displays can be connected directly to the device without additional adapters.

The highest refresh rate that the integrated graphics adapter can output at its maximum supported resolution over a DisplayPort connection. It indicates how many times per second the image is refreshed on the display, affecting motion smoothness and visual quality.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The operating system that is installed on the device, indicating the software platform that manages hardware resources and provides services for applications. It can be a commercial OS such as Windows or macOS, an open‑source distribution like Linux, or a proprietary firmware used in embedded devices.

Indicates the preferred or supported orientation of a product, such as landscape, portrait, horizontal/vertical, or other directional settings. This attribute helps users understand how the device can be positioned for optimal use.

The pair of horizontal and vertical dimensions in millimetres that a product supports for VESA mounting (e.g., "100 × 100 mm"). This value indicates the exact hole spacing required by a mounting bracket to secure the device. It is used for monitors, TVs, projectors and other display equipment that can be wall‑mounted or attached to stands.

The specific technology used to construct the display panel, such as IPS, TN, VA, OLED, or LCD. It indicates how pixels are controlled and affects image quality, color accuracy, viewing angles, and power consumption.

Indicates whether a product requires the entry of a password to access sensitive functions or data, providing an additional layer of security against unauthorized use.

Indicates whether a product has an audio input port that can receive external sound signals, such as a headphone jack, RCA connector or optical cable. The value is "Yes" if the device includes at least one such input and "No" otherwise.

A textual description of how PCI Express lanes are distributed across the available slots or interfaces in a device. The value typically lists groups of lanes separated by commas, where each group may contain a number of lanes and optional ‘+’ signs to indicate combined lanes that share the same speed (e.g., "1x16", "2x8", "1x8+2x4"). This attribute helps users understand the bandwidth capacity and compatibility of expansion slots.

Indicates whether a device can display a primary content stream while simultaneously showing another content stream in an overlay window (Picture‑in‑Picture). This feature is relevant for televisions, monitors, and computers that support simultaneous viewing of two video sources.

Indicates whether the product requires a Personal Identification Number (PIN) to access sensitive functions or the device itself, providing an additional layer of security against unauthorized use.

Represents the physical dimensions of a single pixel on a display or imaging device, expressed as width and height in a length unit (e.g., millimeters). This attribute allows comparison of the physical resolution across screens, cameras, and other pixel‑based technologies.

Indicates whether the product can be used immediately after installation without requiring additional configuration or drivers.

The unique numeric identifier assigned by Intel to each processor model, used for precise identification and lookup of technical specifications.

The highest clock speed a processor can reach when its turbo or boost feature is active, expressed in hertz (Hz). This value indicates the peak performance capability of the CPU under load and helps users compare how fast a processor can run beyond its base clock speed.

The name of the company that designs and produces the central processing unit used in a device, such as Intel, AMD or Qualcomm. It identifies the manufacturer so users can quickly see which brand’s processors are supported by the product.

The amount of internal memory reserved for a processor’s cache, expressed in units such as megabytes (MB) or gigabytes (GB). This value indicates how much data the CPU can store locally to accelerate access and improve performance.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

The primary purpose of a product, indicating its main intended use or target market segment (e.g., "Gaming", "Office", "Travel"). It helps customers quickly identify whether the item matches their needs and can be used for filtering or categorization across different product categories.

The total count of individual product units contained within a single master carton. This value indicates how many pieces are packaged together in one master carton, helping buyers and logistics planners estimate shipping volume, inventory needs, and packaging costs.

Indicates whether a quick‑start guide is provided with the product. A value of "Yes" means that a brief, introductory manual or overview is included to help users get started quickly; "No" indicates that no such guide is supplied.

The time interval between a stimulus and the corresponding response of a device or system, expressed in units such as milliseconds (ms). It indicates how quickly the product reacts to input or processes data, which is critical for performance-sensitive applications like displays, gaming monitors, and interactive devices.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

Indicates whether the product includes an RS‑232 serial port for data communication, allowing connection to legacy devices or equipment that use this standard interface.

Indicates whether the product includes an RS‑232C serial port, a standard communication interface used for connecting and controlling electronic devices.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

A list of processor instruction set extensions that a CPU can execute, such as AVX, AVX2, SSE4.1, SSE4.2, and AVX‑512. Each value represents an individual extension or group of extensions supported by the hardware.

A short alphanumeric code that identifies the thermal solution or cooling configuration used in a computer component such as a processor, motherboard, or chassis. The identifier is typically assigned by the manufacturer and can be referenced to determine compatibility, performance characteristics, or warranty information for the cooling system.

Indicates whether a device has a touchscreen interface that can detect touch input. The value is "Yes" if the device includes a functional touchscreen, and "No" otherwise.

Indicates whether a product includes an integrated television tuner that can receive broadcast signals directly without requiring an external receiver. The value is "Yes" or "No", representing the presence or absence of this feature.

Represents how many TVI (Television Interface) connectors are present on the product. The value is a simple integer indicating the total count of TVI ports, regardless of version or configuration.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The specific version of the USB standard that a product supports, expressed as a generation number and optional descriptive suffix (e.g., "3.2 Gen 1" or simply "3.0"). This attribute indicates the data‑transfer capabilities and compatibility with USB devices.

The range of vertical scan frequencies that a display device can support, expressed in hertz (Hz). It indicates the minimum and maximum refresh rates at which the screen updates vertically, affecting visual smoothness and stability.

Indicates whether a product supports the VESA mounting standard, which defines the size and placement of mounting holes on displays or monitors. The value can be "Yes" or "No", or it may specify one or more VESA patterns such as "100 × 100 mm" to indicate the exact dimensions supported.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.