StarTech MICRO USB TO SERIAL CONVERTER FOR ANDROID with USB CHARGING - ICUSBANDR232 (Components > Add On Cards & Controllers)

The maximum theoretical speed at which a serial communication interface can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different serial devices and adapters.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

The number of bits used to represent each data unit in a device’s interface or communication channel. It indicates the width of the data path and affects how much information can be transferred per clock cycle. Values are typically integers such as 8, 16, 32, or 64.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

The number of stop bits used in a serial communication interface. Stop bits indicate how many bit periods are transmitted after each data byte to signal the end of that byte and allow the receiver to resynchronize. Common values include 1, 1.5, or 2 stop bits.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.