StarTech.com 2-Port PCI Express Serial Card with 16C1050 UART - RS232

The maximum theoretical speed at which a serial communication interface can send or receive data, expressed in bits per second (bps) or its multiples such as kbps, mbps, gbps, etc. This value represents the upper bound of throughput under optimal conditions and is useful for comparing performance across different serial devices and adapters.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

El chipset es el conjunto de circuitos integrados que controla la comunicación entre la CPU, la memoria y los dispositivos periféricos en una placa base. Indica la familia de soporte del procesador y las características disponibles, como número de puertos SATA, tipos de ranuras PCIe y compatibilidad con memorias.

The number of bits used to represent each data unit in a device’s interface or communication channel. It indicates the width of the data path and affects how much information can be transferred per clock cycle. Values are typically integers such as 8, 16, 32, or 64.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product comes with drivers included in the package or available for download. A value of "Yes" means that drivers are supplied, while a value of "No" indicates they are not provided and must be obtained separately.

The environmental conditions under which the product is designed to operate safely and reliably, expressed as a temperature range in degrees Celsius and a relative humidity range in percent. Values are typically formatted like "0 °C to 40 °C – 10 % to 90 %" or similar.

Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.

Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

List of physical or logical interfaces that allow communication between a host device and other components, such as USB, PCI Express, SATA, M.2, Ethernet, Thunderbolt, or similar standards.

Indicates whether the product is designed to be installed inside a computer system, such as an internal hard drive, SSD, or network card. A value of "Yes" means it can be mounted within the chassis; "No" indicates it is intended for external use.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

Indicates whether the product comes with mounting brackets as part of its standard package. A value of "Yes" means that one or more brackets are supplied to facilitate installation, while a value of "No" indicates that no brackets are included and must be purchased separately.

List of physical or logical interfaces that a product can use to send data, video, audio, or other signals to external devices, such as USB, HDMI, DisplayPort, VGA, Ethernet, Thunderbolt, and similar standards.

The total number of individual units contained within a single package or bundle. This value helps customers understand how many pieces they receive when purchasing the product, and it is useful for inventory, shipping, and comparison purposes.

The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.

The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.

The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.

Indicates whether a quick‑installation guide is provided with the product. A value of "Yes" means that a brief, step‑by‑step manual or overview is included to help users set up the device quickly; "No" indicates that no such guide is supplied.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

The type of serial communication interface supported by the product, such as RS‑232, RS‑485, RJ‑45, or SATA. It indicates which physical connectors and protocols are available for data exchange with other devices.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.