TUF H310 Plus Pro

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

Indicates whether the product includes a standard ATX power connector with 24 pins, which is used to supply main power to motherboards and other components in desktop computers.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

Indicates whether the product includes a clear‑CMOS jumper, a small connector that allows resetting the CMOS memory to factory defaults. A value of "Yes" means the jumper is present and can be used for troubleshooting or configuration reset; "No" indicates it is absent.

Represents how many serial (COM) connectors are available on the product. The value is a simple integer indicating the total count of COM ports, regardless of version or configuration.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the product includes an EPS (Extended Power Supply) connector, typically used to provide additional power to high‑performance components such as GPUs or server CPUs.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the product has an audio connector on its front panel. The value is "Yes" if a front‑panel audio jack or similar input is present, and "No" otherwise.

Indicates whether the product includes a connector on its front panel. The value can be "Yes" or "No", representing the presence or absence of this port.

Indicates whether the product supports Intel’s Extreme Memory Profile (XMP), a technology that allows users to apply pre‑defined memory timings and frequencies for optimal performance.

The specific model or designation of the LAN (network) controller integrated into a device, such as "Intel I219-V" or "Realtek RTL8111H." This value identifies the exact network interface hardware used for Ethernet connectivity, enabling users to compare performance, compatibility, and support across products.

Indicates whether a user manual—physical or digital—is provided with the product. A value of "Yes" means that a manual is included, while a value of "No" indicates that no manual is supplied.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

The form factor of the memory module that a product can accept, such as DIMM or SO‑DIMM. It indicates whether the device uses standard desktop RAM modules (DIMM) or smaller laptop‑style modules (SO‑DIMM).

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

The chipset family identifies the group of integrated circuits that manage communication between a computer’s CPU, memory, and peripheral devices on a motherboard. It indicates the supported processor families, available I/O interfaces, and overall system capabilities, helping users assess compatibility and feature sets for motherboards or other hardware components.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

Indicates whether the memory module does not support error‑correcting code (ECC). A value of Yes means the module lacks ECC protection, while No means it includes ECC functionality.

The total count of electrical connectors on a computer chassis that accept cooling fans. This value indicates how many separate fan units can be attached to the case for airflow management, allowing users to assess cooling capacity and compatibility with their system.

The total count of physical SATA III (Serial ATA Revision 3) ports available on a product. It indicates how many internal connections can be used to attach storage devices such as hard drives or solid‑state drives that support the SATA III interface.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

Indicates whether the product includes a digital audio output port using the Sony/Philips Digital Interface (S/PDIF). A value of "Yes" means the port is present; "No" means it is absent.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

Indicates whether the memory modules in the product are unbuffered (non‑registered). A value of "Yes" means the device uses standard unbuffered RAM, while "No" indicates that buffered or registered memory is used.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.