Ubiquiti EdgeSwitch 5XP

Indicates whether the product supports 10 Gigabit Ethernet (10 GbE) connectivity, either through dedicated 10 GbE ports or via SFP+ modules that enable 10 GbE operation.

The type of connector used to supply 12‑volt electrical power to a device, such as a standard ATX power plug or other proprietary 12‑V connectors. It indicates the physical interface that allows the device to receive its main power supply.

A list of the two‑dimensional barcode symbologies that a device can read or write, such as Aztec Code, Data Matrix, MaxiCode, Micro QR Code, PDF417, and QR Code. Each value represents a distinct barcode format that the product supports.

The electrical potential difference supplied by the AC adapter to a device, expressed in volts (V). It indicates the nominal voltage that the charger outputs and is used to match the adapter with compatible equipment.

The frequency of the alternating current supplied to a power supply or charger, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the device, ensuring proper functionality and safety.

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates whether the product supports an Access Control List (ACL) feature, allowing administrators to define rules that permit or deny network traffic based on criteria such as IP address, port number, or protocol.

The version of the Advanced Configuration and Power Interface (ACPI) standard that a product supports or implements. It indicates the level of power‑management features, hardware configuration capabilities, and operating‑system compatibility available on the device.

Indicates whether the product includes an ARP inspection feature, allowing the device to monitor and filter Address Resolution Protocol traffic for security or performance purposes.

Indicates whether the product includes a standard ATX power connector with 24 pins, which is used to supply main power to motherboards and other components in desktop computers.

The model of the audio processing chip integrated into a device, indicating the specific hardware responsible for sound generation and decoding.

Indicates whether the product has an audio connector available for connecting external devices such as headphones, speakers or microphones. The value is "Yes" if a physical audio port (e.g., 3.5 mm jack, RCA, optical) is present and "No" otherwise.

Indicates whether the product includes a dedicated audio input port (e.g., 3.5 mm jack, RCA, optical). A value of "Yes" means an audio input is present; "No" means it is absent.

The total count of physical audio connectors available on the product, such as headphone jacks, RCA outputs, or optical ports. The value is an integer indicating how many separate audio input or output points can be used to connect external devices.

Indicates the total number of independent audio channels that a product can produce or process, including sub‑channels such as those used in surround sound configurations (e.g., 5.1, 7.2). The value may be an integer or a decimal to represent fractional channel groups.

A list of authentication mechanisms that a network device can use to verify users or devices, such as Guest VLAN, Port-based authentication, MAC-based authentication, Web-based authentication, Captive Portal, and Auto VLAN. The values are comma‑separated strings representing each supported method.

The authentication mechanisms supported by a network device or access control system. Common values include RADIUS, IEEE 802.1x, HWTACACS+, AAA, and combinations of these protocols. The attribute lists all enabled methods, separated by commas.

Indicates whether the device can automatically detect and configure MDI or MDI‑X connections for network cables, simplifying cable management and reducing manual setup.

The firmware interface used by a computer system to initialize hardware and load the operating system, such as UEFI or legacy BIOS. It indicates whether the motherboard supports modern features like secure boot, fast startup, or compatibility with older operating systems.

The estimated number of printed pages a toner cartridge can produce before it needs replacement, expressed as a numeric value followed by the word "pages". It indicates the print capacity of the consumable under normal operating conditions.

Indicates whether the product has been certified by Blue Angel, a recognized sustainability and quality standard that ensures compliance with environmental and social criteria.

A list of brand names that the product is compatible with. Each entry represents a manufacturer whose products can be used with or alongside the item.

Indicates whether a network device includes a feature that limits the amount of broadcast traffic to prevent network congestion and potential outages caused by excessive broadcast packets.

The amount of data that a device can temporarily store in its internal memory before processing or transferring it. The value is expressed with a digital capacity unit (e.g., kilobytes, megabytes). This attribute helps understand the performance and efficiency of hardware when handling information streams.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as an integrated monitor on a laptop or a built-in display on appliances. A value of "Yes" means the device has such a display; a value of "No" means it does not.

Indicates whether the product contains a built‑in central processing unit (CPU) that can execute instructions without requiring an external processor module. A value of "Yes" means the device has such a CPU; "No" means it does not.

The linear distance that a cable covers, expressed with a length unit such as meters, centimeters or inches. It represents the total usable length of the cable for connecting devices.

Indicates whether the product includes a built‑in system for organizing, routing, or securing cables. The value can be "Yes" when a cable management feature is present, "No" when it is absent, or a descriptive term such as "Cable Inlay System (CIS)" or "Cable Management System (CMS)" that specifies the type of integrated solution.

A list of the cable types that are supplied with the product, such as USB, HDMI, VGA, DisplayPort, LAN (RJ‑45), SATA, audio or other relevant connectors.

A list of official certifications or compliance marks that the product has received from regulatory bodies, safety organizations, or industry standards groups. Each entry represents a distinct certification such as CE, FCC, RoHS, UL, or WEEE, and may include additional details like version numbers or specific test reports.

Indicates whether the product includes a clip, such as for attaching accessories or closing compartments. A value of "Yes" means the clip is part of the standard package; a value of "No" means it is not included and must be purchased separately.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The estimated number of pages a colour toner cartridge can produce before it needs replacement. It represents the print capacity of the cartridge under normal operating conditions and is expressed as a numeric value followed by the unit "pages".

A colour is a visual attribute that describes the hue or shade of an object or surface. It can be a single dominant colour, a combination of colours, or a range such as "Black, White". The value may be expressed in common names (e.g., Black, Silver) or descriptive terms (e.g., One Colour, Assorted).

Represents how many combo SFP (Small Form-factor Pluggable) ports are physically present on the product. The value is a simple integer indicating the total count of these ports, regardless of speed or interface variant.

A list of operating system names and versions that the product can run or support, including specific architectures when relevant. Each value represents a distinct OS that is compatible with the hardware or software.

Specifies the type of device or system that the product is intended to be used with, such as a PC, server, notebook, surveillance system, or other electronic equipment. The value represents a single category and can be used to filter or group products by their target platform.

The network and data interface technologies supported by the product, such as Wired, Wireless, USB, Bluetooth, or combinations thereof. Each value represents a distinct technology that can be used for communication or power delivery.

The physical interface or port located at the first end of a cable or device, such as USB‑A, HDMI, RJ‑45, DisplayPort, Lightning, or other standard connectors. It identifies the shape, pin count and electrical characteristics that determine compatibility with cables, adapters or other components.

The physical interface or port used to connect a device to another component, such as USB, HDMI, RJ‑45, audio jacks, or fiber optic connectors. It identifies the shape, pin count, and electrical characteristics that determine compatibility with cables, adapters, and peripherals.

Represents how many console ports are physically present on the product. The value is a simple integer indicating the total count of console connectors, regardless of type or version.

The country where the product was manufactured or its primary geographic source. This attribute indicates the nation responsible for the production or assembly of the item.

The electrical potential difference that a device is designed to accept from its power source, expressed in volts (V). It indicates the nominal operating voltage for the product and helps users verify compatibility with local mains or battery supplies.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

A comma‑separated list of the DHCP roles and options that a device can provide or use, such as server, client, relay, snooping, option 82 support, and IPv6 variants. The value may contain multiple items for a single product.

Indicates whether the device can print directly from mobile devices, network shares or other sources without requiring additional drivers or software installation. A value of "Yes" means the printer supports direct printing technologies such as AirPrint, Mopria Print Service, or similar solutions; a value of "No" indicates that direct printing is not supported.

The total number of text lines that a device’s built‑in or external display can show at once. It indicates how many separate rows of characters are visible on the screen, which is useful for understanding readability and interface layout.

Represents how many DVI‑D connectors are present on the product. The value is a simple integer indicating the total count of DVI‑D ports, regardless of version or configuration.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

The average amount of electrical energy a product uses in one week, expressed in kilowatt‑hours (kWh). This figure represents the typical operating consumption and can be used to estimate weekly running costs or compare efficiency across similar devices.

A list of envelope sizes that a product can accept, expressed with standard codes or names (e.g., "DL", "C5", "10"), optionally combined in comma‑separated groups to indicate compatible envelopes.

The level of a product’s compliance with the EPEAT (Electronic Product Environmental Assessment Tool) program, indicating how well it meets environmental and sustainability criteria. Typical levels are "Gold", "Silver" or "Bronze".

Indicates whether the product includes an EPS (Extended Power Supply) connector, typically used to provide additional power to high‑performance components such as GPUs or server CPUs.

A list of the Ethernet standards that a product supports, such as Fast Ethernet (10/100 Mbps), Gigabit Ethernet (1 Gbps), 2.5 GbE, 10 GbE, and other variants. Each value is a free‑text label describing one supported interface; multiple values are separated by commas when the device offers more than one speed or generation.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Indicates whether the device can receive firmware updates, allowing improvements in functionality and security fixes through downloads from the manufacturer.

The total amount of internal flash memory available in a device, expressed as a data size (e.g., megabytes or gigabytes). This attribute indicates how much data can be stored on the device’s built‑in flash storage and is useful for comparing storage capacity across products.

Indicates whether a device includes hardware or firmware that can manage the flow of data on its interfaces, such as enabling or disabling automatic pause frames, handling congestion, or providing other traffic‑control mechanisms. A value of "Yes" means the feature is present and can be configured; "No" indicates it is not available.

Specifies the physical configuration or design of a product, such as ATX, Micro‑ATX, Mini‑ITX, tower, case with cover, etc. It describes how the device is built and what mounting or expansion options it supports.

The maximum number of packets a device can forward per second, expressed in megapackets per second (Mpps) or similar units. It indicates the throughput capability of networking hardware such as switches and routers under optimal conditions.

Indica los ventiladores que están físicamente instalados en la parte frontal del producto, indicando para cada uno el número de unidades y su diámetro (por ejemplo, "1x 120 mm"). Este atributo permite conocer los tamaños exactos de los ventiladores presentes y facilita la planificación de refrigeración o compatibilidad con accesorios.

Indicates whether the product has an audio connector on its front panel. The value is "Yes" if a front‑panel audio jack or similar input is present, and "No" otherwise.

Indicates whether a device can transmit and receive data simultaneously on two channels, allowing bidirectional communication without delay. A value of "Yes" means the device supports full‑duplex operation; a value of "No" indicates it operates only in half‑duplex mode.

Represents the count of physical Gigabit Ethernet (10/100/1000 Mbps) copper interfaces available on a device. The value is an integer indicating how many separate RJ‑45 connectors support Gigabit speeds, regardless of other port types or generations.

Indicates which hand the product is designed for or can be used with. Common values are "Ambidextrous" (usable by both left‑ and right‑handed users) or a specific hand such as "Right-handed" or "Left-handed". The attribute helps customers choose items that fit their dominant hand.

Indicates whether the product includes a cage or enclosure that can accommodate both a hard disk drive (HDD) and a solid‑state drive (SSD) simultaneously. A value of "Yes" means the case is designed to hold one HDD and one SSD in the same bay, while "No" indicates it supports only one type of drive at a time.

Indicates whether the product implements mechanisms to prevent head‑of‑line (HOL) blocking, a network performance issue where a single packet or flow delays subsequent traffic on the same path. A value of "Yes" means the device includes such mitigation features; "No" indicates it does not.

The amount of thermal energy a product can dissipate, expressed in a standard unit such as BTU per hour or watts. It indicates the cooling requirement and helps compare how much heat the device generates during operation.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indica el material o la combinación de materiales con los que está fabricado el componente más importante de un producto, como metal, plástico, vidrio u otros compuestos. Este atributo ayuda a comprender la durabilidad, peso y estética del artículo.

The overall geometric configuration of a product’s outer enclosure or housing, such as round, rectangular, square, oval, cylindrical, triangular, or other common silhouettes. This attribute helps users quickly identify and compare items based on their visual appearance.

Indicates the target market segment for a product, such as "Business", "Home", or "Small‑medium business". This attribute helps customers quickly identify the intended user group and typical use case of the item.

Indicates whether the product supports HP Web Jetadmin, a management tool for printers and other devices.

Indicates whether a product has illumination or lighting capability. The value is "Yes" if the product includes any form of light source (LED, back‑lit display, built‑in lamp, etc.) and "No" otherwise.

The hue or combination of hues emitted by a light source, expressed as common colour names such as "Red", "Green", "Blue" or comma‑separated lists like "Red, Green, Blue". This attribute indicates the perceived colour of the illumination produced by devices such as LEDs, lamps, or other lighting fixtures.

The physical position within a product where an illumination source is installed, such as front, rear, top, side, or internal. This attribute helps users understand where the light originates and how it integrates with the device’s design.

The maximum number of pages that a single black ink or toner cartridge can print before it needs to be replaced. This value helps users estimate how often they will need to refill or replace the cartridge and compare the longevity of different cartridges.

The electrical current drawn by a device when powered, expressed in amperes (A). It indicates how much current the product consumes from its power source during normal operation and can be used to assess compatibility with power supplies or USB ports.

The range of electrical voltage that a device can safely accept from its power source, expressed in volts (V). It specifies the minimum and maximum supply voltages compatible with the product, covering both AC and DC inputs where applicable.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The IP (Ingress Protection) code indicates a product’s resistance to solids and liquids. It follows the standard two‑digit format (e.g., IP20, IP67), where the first digit represents protection against solid particles and the second against liquids. The code may include an ‘X’ to denote unknown protection for that category or multiple codes separated by commas for products offering different levels of protection in various configurations.

Indicates whether the product can perform IP routing, forwarding packets between networks based on destination addresses.

A list of the standard ISO B‑series paper dimensions that a device can accept, such as B0, B1, …, B5. Each value represents a distinct sheet size and allows users to verify compatibility with the documents they need to print or scan.

The largest Ethernet frame size in bytes that the device can transmit or receive without fragmentation. This value determines the maximum payload that can be sent in a single network packet, which can improve throughput for high‑bandwidth applications.

A list of the functions or statuses that an LED indicator on a device can display, such as power status, activity, link, and other operational signals.

A list of the linear (1‑dimensional) barcode symbologies that a device can read or encode, such as Code 39, Code 128, Codabar, EAN‑13, UPC‑A, and other common 1D formats. Each value represents a distinct barcode type that the product supports.

Indicates whether the device can combine multiple network connections into a single logical link to increase bandwidth or provide redundancy.

List of Linux operating systems that the product can run or support, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

Indicates whether the device includes loop protection to prevent network loops that can cause broadcast storms and disrupt traffic.

Indicates whether the device supports filtering network traffic based on MAC addresses. When enabled, the device can allow or block communication for specific devices identified by their MAC address.

The total count of unique MAC addresses that the device can store in its forwarding table. This value indicates how many devices can be simultaneously connected before the switch must start discarding or aging out older entries.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

A list of network protocols that a device can use for configuration, monitoring and remote management, such as SNMP, HTTP/HTTPS, Telnet, SSH or other standard interfaces. Each protocol is represented by its common name and may be separated by commas or slashes in the source data.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The material indicates the type of substance from which a product is made, such as metal, plastic, wood, glass, or composite materials. It helps users understand the product’s durability, weight, appearance, and suitability for specific applications.

The maximum number of sheets a printer or paper feeder can hold at one time, expressed as an integer followed by the unit "sheets" (e.g., 500 sheets). This attribute helps users understand how much paper the device can accommodate before needing to be refilled.

The vertical dimension of a CPU cooler measured from its lowest to highest point, expressed in a physical unit such as millimetres, centimetres or inches. This attribute applies to any computer system where the height of the cooling solution is relevant for compatibility with case clearance and airflow considerations.

The maximum number of pages a printer, copier or fax machine is designed to handle in a typical month of operation. It indicates the expected workload capacity and helps users compare how heavily different models can be used before reaching their limits.

The maximum linear dimension of a graphics card that can fit within the product’s enclosure, expressed in a standard length unit such as centimeters or inches. It indicates how large a GPU can be installed without exceeding the case or chassis limits.

The maximum number of sheets or pages that a printer, copier, or fax machine can accept in a single feeding cycle. It indicates the largest input tray capacity and helps users understand how many pages can be processed automatically before needing to reload paper.

The highest number of sheets a printer, copier or fax machine can process in a single operation cycle, such as printing, copying or scanning. This figure indicates the device’s throughput capability and helps users compare productivity across models.

The highest electrical power that a device can draw or consume during operation, expressed in watts (W). It represents the peak energy usage of the product and is useful for estimating maximum power requirements, comparing efficiency across similar devices, and ensuring compatibility with power supplies.

The maximum linear dimension of a power supply unit that can fit within the product’s enclosure, expressed with a standard length unit such as centimeters or inches. It indicates the longest PSU that can be installed without requiring modifications to the case or chassis.

The highest number of discrete items a device can process per second when reading from storage or memory. It indicates how quickly the device retrieves information for subsequent operations, such as data transfer, indexing, or real‑time processing.

The highest pixel dimensions that a device can output or support, expressed as width by height (e.g., 1920x1080). It indicates the maximum resolution available for display content on the product.

The configuration of memory channels supported by a device, indicating how many independent memory paths the system can use for data transfer (e.g., Dual‑channel, Quad‑channel). This attribute helps users understand the potential bandwidth and performance characteristics of the memory subsystem.

The form factor of the memory module that a product can accept, such as DIMM or SO‑DIMM. It indicates whether the device uses standard desktop RAM modules (DIMM) or smaller laptop‑style modules (SO‑DIMM).

The classification of the memory technology used in a device, such as DDR4 SDRAM, LPDDR3, GDDR6, or other variants. It indicates the architecture and generation of the RAM modules installed or supported by the product.

Indicates whether the product includes at least one built‑in microphone. A value of "Yes" means that the device has an integrated microphone, while "No" indicates it does not.

A comma‑separated list of mobile printing services or protocols that a device can use to send print jobs from smartphones, tablets or other mobile devices. Typical values include Apple AirPrint, Google Cloud Print, Mopria Print Service and similar cloud‑based solutions.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The chipset family identifies the group of integrated circuits that manage communication between a computer’s CPU, memory, and peripheral devices on a motherboard. It indicates the supported processor families, available I/O interfaces, and overall system capabilities, helping users assess compatibility and feature sets for motherboards or other hardware components.

The physical layout and size classification of a motherboard, such as ATX, Micro‑ATX, Mini‑ITX, or other standardized formats. It indicates the dimensions, mounting points, and expansion capabilities that determine compatibility with computer cases and components.

The maximum number of sheets a multi‑purpose input tray can hold in a single feeding cycle. This value indicates the paper capacity of the tray, helping users understand how many pages can be processed automatically before needing to refill or change the tray.

Indicates whether the device can send or receive IP multicast traffic, allowing it to participate in group communications such as streaming media, IPTV, and certain network protocols that rely on multicast distribution.

Indicates whether the product can connect to a network, either wired or wireless, and is capable of transmitting and receiving data over that connection.

The total count of physical expansion slots available on a computer case for installing additional hardware such as PCI‑Express cards, USB adapters or other peripheral modules. The value is an integer without any unit and represents how many separate slots can be used to expand the system’s capabilities.

The total count of physical SATA III (Serial ATA Revision 3) ports available on a product. It indicates how many internal connections can be used to attach storage devices such as hard drives or solid‑state drives that support the SATA III interface.

Indicates whether the product includes a dedicated button that allows the user to power the device on or off. The value is either "Yes" or "No".

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

A list of operating system names and versions that the product can run or support beyond its primary OS, including both commercial and open‑source distributions. Each value represents a distinct OS that is compatible with the hardware or software.

The electrical current drawn by a device from its power source, expressed in amperes (A). It indicates how much current the product consumes during normal operation and helps determine compatibility with power supplies or USB ports.

A list of natural languages in which the page description of a product is available or supported, allowing users to view or interact with the content in their preferred language.

The type of paper input mechanism available in a printer or copier, such as a standard tray, cassette, sheet‑fed feeder, manual feed, or roll. It indicates how the device accepts and feeds paper for printing, scanning or copying.

Indicates whether a product requires the entry of a password to access sensitive functions or data, providing an additional layer of security against unauthorized use.

Indicates whether the device supports port mirroring, a feature that allows one or more ports to copy traffic from another port for monitoring or analysis purposes.

The type of connector used to supply power to the device, such as AC‑in jack, DC‑in jack, USB Type‑C, SATA Power, or PCIe power connectors. It indicates the physical interface that delivers electrical energy to the product.

The amount of electrical power a device uses during normal operation, expressed in watts (W). It represents the typical energy draw when the product is actively performing its intended functions and can be used to estimate operating costs or compare efficiency across similar devices.

Indicates whether a power cord is supplied with the product. A value of "Yes" means that a power cable is included in the package, while "No" indicates it is not provided and must be purchased separately.

Indicates how many Power over Ethernet (PoE) ports are available on the device. The value is a simple integer representing the total count of physical PoE connectors that can supply power to compatible devices such as IP cameras, wireless access points or VoIP phones.

The electrical plug configuration that the product uses to connect to a power source. It indicates the shape, number of pins and country or region standard (e.g., Type G, Type C, Type N). This attribute helps buyers identify compatibility with local outlets and determine if an adapter or converter is needed.

The main electrical supply that powers the device, such as mains electricity (AC), battery, USB power, PoE, or a combination of these options.

The electrical power consumption or output of the product, expressed in watts (W). It indicates how much energy the device uses during operation or how much power it can deliver to connected equipment.

The physical position where the power supply unit is installed or mounted within a device, such as top, bottom, rear, side, front, or built‑in. This attribute helps users understand where to find the power source and plan cable routing or ventilation.

The pixel density of a printer’s output, expressed as dots per inch (dpi). It indicates how many individual printing points are used to render an image or text, affecting the sharpness and detail of printed documents.

Indicates whether a product supports Quality of Service (QoS) features, which allow prioritization and management of network traffic to ensure optimal performance for critical applications.

Indicates whether a quick‑start guide is provided with the product. A value of "Yes" means that a brief, introductory manual or overview is included to help users get started quickly; "No" indicates that no such guide is supplied.

Indicates whether the product is a rack mounting kit and, if applicable, its compatibility with standard rack systems. The value can be "Yes" or "No", or it may include a measurement such as "1U" or "2U" to specify the height occupied by the kit when installed in a rack.

Indicates whether a product is designed to be mounted in a rack system. The value can be "Yes" or "No", or it may specify the height occupied by the device using rack units (U) such as "1U", "2U", or a numeric measurement with unit, e.g., "61.25 mm".

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

Indicates whether the device supports rate limiting, a feature that restricts the maximum data transfer speed or bandwidth to prevent network congestion or ensure fair usage among connected devices. A value of "Yes" means the device can enforce such limits, while "No" indicates it does not provide this capability.

The sizes of fans that can be installed on the rear side of a computer case, expressed in millimetres (mm). Values may list one or more diameters separated by commas, indicating all compatible fan sizes for that position.

The total count of fan units installed on the rear side of a product or component. The value is an integer greater than zero and represents how many separate fans are present, which can affect cooling performance and noise levels.

The expected number of pages a printer, copier or fax machine is designed to produce in an average month under normal operating conditions. It indicates the workload capacity that the device can handle without overheating or failure.

Indicates whether the product can be refilled with additional consumables such as ink, toner or other media.

Indicates whether the device has a physical reset button that restores factory settings or original configuration when pressed.

Indicates whether the product includes an internal RGB LED pin header that can be used to connect RGB lighting strips or devices directly inside the system. A value of "Yes" means the header is present and usable; a value of "No" means it is absent.

Indicates whether the product is manufactured in accordance with the RoHS (Restriction of Hazardous Substances) directive, which limits the use of certain hazardous materials in electrical and electronic equipment.

Indicates whether the product includes a digital audio output port using the Sony/Philips Digital Interface (S/PDIF). A value of "Yes" means the port is present; "No" means it is absent.

The functional configuration of a scanner, indicating how documents are fed into the device. Common types include flatbed scanners with automatic document feeders (ADF), sheet‑fed scanners, single‑pass or dual‑pass ADFs, and specialized modes such as 1D/2D barcode readers. This attribute helps users understand whether the scanner can handle single pages, multiple pages automatically, or specific scanning formats.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

Indicates whether the product includes a side panel window that allows visual access or ventilation to internal components.

The sound intensity produced by a printer while it is in operation, expressed in decibels (dB). This value indicates how loud the device is during normal printing tasks and helps users assess suitability for quiet work environments.

Indicates whether the device implements the Spanning Tree Protocol (STP), a network protocol that prevents loops in Ethernet topologies by dynamically blocking and forwarding paths to maintain a loop‑free logical topology.

The linear measurement of a book’s spine from one edge to the other, expressed in units such as millimetres or inches. It indicates how thick the binding is and helps determine storage space, handling, and compatibility with shelving or protective covers.

Indicates whether the device can establish secure connections using SSH or SSL protocols, allowing encrypted remote management and data transfer.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

Indicates whether the device can temporarily store data packets before forwarding them, allowing traffic management even when the destination is not immediately available. A positive value means the device can buffer and later deliver packets reliably.

Indicates the types of products, users or environments for which the item is intended or compatible. The value can be a single category such as "Gaming" or a specific product type like "Computer case".

A list of the physical dimensions of hard drives that a product can accommodate, expressed in inches or millimeters (e.g., "2.5", "3.5", "M.2"). The values are typically separated by commas and indicate which drive form factors fit within the device’s bays or slots.

The operating frequencies that a processor or memory module can run at, expressed in megahertz (MHz) or gigahertz (GHz). This attribute lists all supported clock rates, allowing users to understand the performance range of the component.

A list of the physical layout and size classifications of motherboards that a computer case or chassis supports, such as ATX, Micro‑ATX, Mini‑ITX, E‑ATX, SSI CEB, etc. Each value represents a distinct form factor that can be mounted in the device.

A list of the physical form‑factor types that a power supply unit can fit into, such as ATX, SFX, EPS, ITX or other standardized sizes. Each value represents a compatible chassis or motherboard mounting configuration for the PSU.

The network layer(s) that a device can operate at, expressed as a string such as "L2", "L3" or combinations like "L2/L3". This attribute indicates the protocol stack level supported by the hardware or firmware.

The classification of a network switch based on its management capabilities, such as Managed or Unmanaged. This attribute indicates whether the device can be configured and monitored remotely (Managed) or operates with fixed settings without remote configuration (Unmanaged). It helps users choose a switch that matches their networking expertise and control requirements.

The maximum data transfer rate that the device can handle, expressed as a numeric value with an appropriate unit such as Gbit/s or Mbit/s. This attribute indicates how quickly data can be transmitted through the device and helps users compare networking performance across products.

Indicates whether the device records system events, such as errors, warnings, or informational messages, in a log that can be accessed for troubleshooting or monitoring purposes.

Indicates whether the product includes one or more tempered glass panels, such as side windows, front or rear covers, or other protective glazing. The value is "Yes" if any tempered glass component is present and "No" otherwise.

The maximum rate at which a device can process or transmit data, expressed in megabits per second (Mpps). It indicates the capacity of network equipment such as switches, routers, or hubs to handle traffic without bottlenecks.

The duration from the moment a web request is made until the first black page is rendered on the screen, expressed in seconds or other standard time units. It indicates how quickly a user sees any visual content and helps assess initial page performance.

The shape or design of a writing instrument’s tip, such as bullet, chisel, fine, fibre, broad, or rollerball. It indicates the point geometry that determines how ink is applied to paper and affects line width, precision, and suitability for different tasks.

The maximum number of paper sheets that a printer or copier can accept in its input tray(s) for a single feeding cycle. It represents the total count of physical pages that can be fed automatically before reloading is required.

The maximum electrical power that a network device can supply to connected Power over Ethernet (PoE) devices, expressed in watts (W). It represents the total PoE budget available for powering attached equipment such as switches, access points, or cameras.

Indicates whether the product includes a physical port that can accept a Trusted Platform Module (TPM) chip, enabling hardware‑based security features such as secure boot and encrypted storage.

The general category or style of the product, such as laptop, printer cartridge, or cooling fan. It helps buyers quickly identify the nature of the item and compare similar products.

Indicates whether the memory modules in the product are unbuffered (non‑registered). A value of "Yes" means the device uses standard unbuffered RAM, while "No" indicates that buffered or registered memory is used.

Indicates whether a USB cable is supplied with the product. A value of "Yes" means that a USB cable is included in the package, while "No" indicates it is not provided.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

Indicates whether the device can configure and manage Virtual LANs (VLANs) for network segmentation and traffic isolation. A value of "Yes" means the product supports VLAN tagging, creation, and management; a value of "No" indicates it does not provide this capability.

Indicates whether the product can be securely mounted to a wall or other vertical surface using standard mounting hardware.

Indicates whether a product includes a kit that allows it to be securely mounted on a wall or other vertical surface using standard mounting hardware. The value is typically "Yes" if the kit is included, or "No" if it is not.

Indicates whether the product can be configured and monitored through a web interface accessible via a browser, allowing remote administration over a local or internet connection.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as 802.11a, 802.11b, 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.

The linear measurement from the device to a target or reference point at which it operates effectively. It indicates how far the product can be positioned from its intended use area while maintaining proper functionality, such as imaging, scanning, or signal transmission.