UCS C240M4SX E52620v4 16GB RAID Bundle

The interface or communication bus that a component uses to connect with other parts of a system, such as PCI Express, USB, SATA, or legacy buses like FSB and QPI. It indicates the protocol and physical connection used for data transfer between devices.

The physical form factor of a computer chassis, indicating its size and layout such as Tower, Desktop, Mini‑PC, or rack units (e.g., 1U, 2U). This attribute helps users identify the footprint, mounting options, and compatibility with other hardware.

Indicates whether the processor in the device is certified as conflict‑free, meaning it has been tested and confirmed to operate without conflicts or incompatibilities with other system components. A value of "Yes" means the processor meets the conflict‑free standard; "No" indicates it does not.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the memory module or component supports Error‑Correcting Code (ECC) for detecting and correcting single-bit errors during operation. A value of "Yes" means ECC is enabled, allowing automatic correction of data corruption; a value of "No" indicates no ECC support.

Indicates whether the processor in a device supports Error Correcting Code (ECC) memory, allowing detection and correction of single-bit errors during data storage or transfer.

Indicates whether the product includes embedded options such as firmware features, hardware modules or configuration settings that are built into the device and available for use without external accessories.

Indicates whether the product includes an Ethernet LAN interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

Represents the total count of Ethernet LAN (RJ‑45) interfaces available on a product. The value is an integer indicating how many physical Ethernet ports are present, regardless of speed or generation.

Indicates whether the processor’s Execute Disable bit is enabled, allowing the CPU to prevent execution of code from memory regions marked as non-executable.

The physical or logical interface used by a hard drive to connect with other components, such as SATA, SAS, USB, PCI Express, or M.2. It indicates the technology that enables data transfer and power delivery between the device and its host system.

The physical width of a hard drive measured in inches or millimetres, typically expressed as the diagonal size of the drive’s enclosure (e.g., 2.5" or 3.5"). This measurement indicates the form factor that determines compatibility with computer bays, external enclosures, and mounting brackets.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

Indicates whether the product can be connected or removed while it is powered on without requiring a shutdown or reboot. A value of "Yes" means the device supports hot‑plugging, allowing components such as drives, peripherals or expansion cards to be added or removed safely during operation; "No" indicates that the device must be powered down before any hardware changes.

Indicates whether the product can have storage units inserted or removed while it is powered on and running without needing to shut down or reboot the system.

A list of the various low‑power or standby modes that a device can enter to conserve energy when not actively performing tasks.

Indicates whether the processor is compatible with the Intel® 64 architecture, enabling it to run operating systems and applications designed for x86‑64 processors.

Indicates whether the product incorporates Intel’s Demand‑Based Switching technology, which dynamically adjusts power delivery to components based on workload demands, improving energy efficiency and performance.

Indicates whether the processor includes Intel’s Enhanced Halt State feature, which allows the CPU to enter a low‑power idle mode when not actively executing instructions, thereby reducing energy consumption without compromising performance.

Indicates whether the product supports Intel’s flexible memory access feature, which allows dynamic allocation and sharing of memory resources between the CPU and other components to improve performance and power efficiency.

Indicates whether the product incorporates Intel’s Trusted Execution Technology, a security feature that creates isolated execution environments to protect sensitive code and data from tampering or unauthorized access.

Indicates the specific version of Intel Transactional Synchronization Extensions – No Interlock (TSX‑NI) supported by a processor, which determines its capability for efficient transaction processing and concurrency control.

Indicates whether the product supports Intel’s virtualization technology, which enables efficient execution of virtual machines by providing hardware‑assisted features such as VT‑x and VT‑d for CPU instruction set extensions.

Indicates whether the product supports Intel Virtualization Technology for Directed I/O, a feature that enables efficient virtualization of input/output operations by allowing virtual machines to directly access hardware devices.

The total amount of internal memory available in a device, expressed as a data size such as megabytes (MB) or gigabytes (GB). It indicates how much information the component can hold for active processes and affects multitasking performance.

The type of memory physically installed inside a device, such as DDR4 SDRAM, LPDDR3, or other RAM variants. It indicates the architecture and generation of the internal memory modules that the product uses or supports.

Cantidad total de líneas (lanes) de la interfaz PCI Express disponibles en un dispositivo o placa base. Cada línea permite el flujo de datos entre el procesador y los dispositivos conectados, por lo que este número indica la capacidad máxima de ancho de banda para tarjetas y periféricos compatibles con PCIe.

The maximum rate at which a processor can transfer data to or from its memory subsystem, expressed as a data transfer speed (e.g., GB/s). It indicates the throughput capacity of the CPU’s memory interface and helps users compare performance potential across different processors.

The total count of independent memory channels supported by a processor or motherboard, indicating how many separate memory paths can be used simultaneously. This value helps users understand the potential for parallel memory access and overall system performance.

A list of the operating frequencies that a processor can run at, expressed in hertz (Hz). The values are typically given as MHz or GHz and may include multiple speeds separated by commas to indicate base, boost, or other supported clock rates. This attribute helps users compare the performance potential of different CPUs and understand the range of speeds they can achieve under various workloads.

The number of physical memory slots that are present and available for installing RAM modules in a device. This count indicates how many separate memory sticks can be installed or upgraded.

The model of the motherboard’s chipset, indicating the family of supported processors and integrated features such as I/O interfaces, memory support, and peripheral connectivity.

The altitude interval (in meters) at which a product or component ceases to function correctly due to environmental factors such as reduced atmospheric pressure, temperature changes, or other elevation‑related effects. The value is expressed as a minimum–maximum range and applies to any device that has documented limits for operation above or below certain heights.

The total count of physical processor units that are installed in a device. It represents how many separate CPU cores or chips are present, regardless of model or generation.

The range of altitudes (in meters) at which a product or component can operate reliably without performance degradation due to changes in atmospheric pressure, temperature, or other altitude‑related effects.

The range of relative humidity (in percentage) within which the product is designed to operate reliably. Values are expressed as a minimum–maximum interval such as "20 - 80 %" and indicate the acceptable environmental moisture level for optimal performance.

The number of bits used by a processor to address physical memory when Physical Address Extension (PAE) is enabled. This value indicates the maximum virtual address space that can be accessed, typically 32, 36, 40 or 48 bits for x86 CPUs.

The frequency of the alternating current supplied to a device, expressed in hertz (Hz). It indicates the acceptable operating range for the electrical mains that powers the product.

The unique numeric identifier assigned by Intel to each processor model, used for precise identification and lookup of technical specifications.

The amount of internal memory reserved for a processor’s cache, expressed in units such as megabytes (MB) or gigabytes (GB). This value indicates how much data the CPU can store locally to accelerate access and improve performance.

Indicates the level or category of a processor’s internal cache memory, such as L1, L2, L3, or Smart Cache. This attribute helps users understand the hierarchy and accessibility of cached data within the CPU, which can influence performance characteristics.

A unique identifier that represents the specific model or variant of a computer processor. The code is typically an alphanumeric string (e.g., "SR2ZU", "SR3LA") used by manufacturers to distinguish between different CPU models, generations, and configurations. It can be entered as free text and may appear in product listings, technical specifications, or inventory records.

The fundamental operating frequency of a processor, expressed in hertz (Hz). It indicates the speed at which the CPU runs under normal conditions and is typically reported in gigahertz (GHz) or megahertz (MHz). This value helps users compare performance potential across different models.

Identifies the exact model of the central processing unit used in a device, including brand and numeric designation such as "Intel Core i5-8250U" or "AMD Ryzen 7 3700X". This value allows users to distinguish between different processor families, generations, and performance levels.

The set of instruction set architectures or execution modes that a processor can operate in, such as 32‑bit or 64‑bit. This attribute lists the supported modes for the CPU and helps users determine compatibility with software that requires a specific bitness.

The overall dimensions of a processor’s physical package, expressed as length × width × height in millimetres or inches. It indicates the size that must fit within a motherboard socket or mounting area and helps users compare compatibility across different CPU models.

The processor series identifies the family or generation of a CPU, such as "Intel Xeon E5-2600" or "AMD Ryzen 5000". It is used to group models that share similar architecture, performance characteristics and compatibility features.

The physical connector used by a processor to attach to a motherboard or compatible platform, such as LGA 1151, BGA 1440, Socket AM4, or LGA 1200. This attribute indicates the exact socket designation required for proper CPU installation and compatibility with other hardware components.

Indicates whether a product is designed to be mounted in a rack system. The value can be "Yes" or "No", or it may specify the height occupied by the device using rack units (U) such as "1U", "2U", or a numeric measurement with unit, e.g., "61.25 mm".

A comma‑separated list that specifies the RAID configurations supported by a storage controller or device. Each entry can be a numeric level (e.g., 0, 1, 5, 10) or a special label such as JBOD. This attribute indicates which disk arrangements the system can manage.

A comma‑separated list of RAID levels that a storage device or controller can support, such as 0, 1, 5, 10, JBOD, and other proprietary configurations. Each value represents a distinct RAID mode the system is capable of creating or managing.

Indicates whether the product includes a redundant power supply system that can provide backup power in case one unit fails, ensuring continuous operation.

The processor stepping code identifies the specific revision of a CPU model, indicating changes in manufacturing that may affect performance, power consumption or compatibility. It is used to distinguish between different silicon revisions within the same product line.

The range of relative humidity (expressed as a percentage) within which the storage device is designed to operate reliably. Values are given as a minimum–maximum interval such as "10 - 90 %" and indicate the acceptable environmental moisture level for optimal performance.

The maximum amount of power, expressed in watts (W), that a processor or other electronic component is designed to dissipate as heat under typical operating conditions. It represents the thermal load the cooling system must handle and is used by manufacturers and users to assess performance, energy consumption, and suitability for specific environments.

Indicates whether the product includes a connector for a Trusted Platform Module (TPM). A positive value means the device has a physical port that can accept a TPM chip, enabling hardware‑based security features such as secure boot and encrypted storage.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.