WF‑6090DW 34PPM A4 Printer

The range of alternating current voltage that the product accepts from its power source, expressed in volts (V). It indicates the minimum and maximum supply voltages compatible with the device across different regions.

Indicates whether the product includes a built‑in screen or display unit that can be used directly for viewing content, such as a monitor on a laptop, an integrated display on a device, or a built‑in screen on appliances. A value of "Yes" means the product has such a display; "No" means it does not.

The colour or combination of colours that a product is available in, expressed as common names such as "Black", "Silver" or comma‑separated lists like "Black, White". It indicates the visual appearance of the item for consumers.

The nation in which the product was assembled or produced. This attribute indicates the primary geographic source of manufacturing for the item.

The linear measurement of an object from front to back or top to bottom, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the item is and can be used for fitting, compatibility, or spatial planning.

Indicates whether the device can print directly from mobile devices, network shares or other sources without requiring additional drivers or software installation. A value of "Yes" means the printer supports direct printing technologies such as AirPrint, Mopria Print Service, or similar solutions; a value of "No" indicates that direct printing is not supported.

The visual technology used by the product’s screen, such as LCD, LED, OLED, TFT or analog. It indicates the underlying display panel that determines image quality, color reproduction and power consumption.

The measurement of a display’s diagonal, expressed in inches or centimeters. It represents the overall visual area available for content and is commonly used to compare monitors, televisions, laptops, tablets, and other electronic devices.

Indicates whether the device can automatically print on both sides of a sheet in a single pass. A value of "Yes" means duplex printing is supported; a value of "No" indicates that only single‑sided printing is available.

Indicates whether the product has an Ethernet interface for wired network connectivity, allowing data transmission over RJ‑45 or compatible cables.

The vertical dimension of a product measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and applies to any item where height is relevant, including books, electronics, furniture and other objects.

List of Linux operating systems that the product is compatible with, including specific versions and architectures when relevant. Each value represents a distinct Linux distribution or kernel version supported by the hardware or software.

A list of macOS operating system versions that the product supports or is compatible with, such as "macOS 10.15 Catalina", "macOS 11 Big Sur" or newer releases. Each entry represents a distinct OS version that can run on or be supported by the device.

A classification that indicates the target audience or use case for a product, such as Business, Gaming, Home & Office, Education, etc. It helps customers quickly identify which products are best suited to their needs.

The maximum number of pages a printer, copier or fax machine is designed to handle in a typical month of operation. It indicates the expected workload capacity and helps users compare how heavily different models can be used before reaching their limits.

The maximum number of sheets or pages that a printer, copier, or fax machine can accept in a single feeding cycle. It indicates the largest input tray capacity and helps users understand how many pages can be processed automatically before needing to reload paper.

The maximum pixel dimensions of a display or image, expressed as width by height (e.g., 1920x1080). It indicates the highest resolution that a device can output or support and is commonly used for monitors, TVs, smartphones, cameras, and digital images.

A comma‑separated list of mobile printing services or protocols that a device can use to send print jobs from smartphones, tablets or other mobile devices. Typical values include Apple AirPrint, Google Cloud Print, Mopria Print Service and similar cloud‑based solutions.

The linear measurement from front to back or top to bottom of a product’s packaging, expressed in a physical unit such as millimeters, centimeters, inches, etc. It indicates how deep the packaged item is and can be used for fitting, compatibility, or spatial planning.

The vertical dimension of a product’s packaging measured from its lowest to highest point. It is expressed in a physical unit such as millimetres, centimetres or inches and helps customers assess how tall the package will be when stored or shipped.

The horizontal measurement of a product’s packaging, expressed in a linear unit such as millimetres or inches. It indicates how wide the package is from one side to the other and helps customers assess fit for storage, shipping, or display.

A list of natural languages in which the page descriptions or captions of a product are available. This attribute indicates the linguistic options for textual information that accompanies each page, such as titles, annotations, or metadata.

The vertical dimension of a pallet measured from its lowest to highest point, expressed in a physical unit such as millimetres, centimetres or inches. It indicates the height of the pallet itself and is useful for determining storage capacity, shipping logistics and compatibility with shelving or handling equipment.

The linear dimension of a pallet measured in a standard unit such as meters, centimeters or inches. It represents the overall length from one end to the other and is used to compare the size of pallets across different products and logistics contexts.

The horizontal measurement of a pallet, expressed in a linear unit such as millimetres or inches. It indicates how wide the pallet is from one side to the other and helps customers assess fit for storage, shipping, or display.

The type of paper input mechanism available in a printer or copier, such as a standard tray, cassette, sheet‑fed feeder, manual feed, or roll. It indicates how the device accepts and feeds paper for printing, scanning or copying.

The weight of the paper or media measured in grams per square metre. It indicates how heavy a sheet of material is and can be used to compare paper density, estimate printing costs, or assess suitability for specific printing tasks.

A comma‑separated list of colour names that a product can produce or display, such as black, cyan, magenta, yellow and any additional variations (e.g., photo‑black, matte black). This attribute applies to printers, ink cartridges, toner cartridges, and other printing consumables.

The total count of individual units contained within a single package or bundle. This value helps customers understand how many pieces they receive when purchasing the product, and it is useful for inventory, shipping, and comparison purposes.

Represents the number of individual items or units that can be placed on a single pallet. This value indicates how many pieces, packages, or components are stored or shipped together on one pallet, helping users assess storage capacity and logistics planning.

A list of cryptographic and authentication methods that a device can use for secure communication or data protection. Each entry represents a distinct algorithm or protocol, such as encryption ciphers (e.g., AES, WEP), authentication mechanisms (e.g., RADIUS, WPA‑PSK), or network security protocols (e.g., HTTPS, SSL/TLS). The values are typically separated by commas and may include both technical identifiers and consumer‑friendly labels.

A list of the physical or logical interfaces that a device can use to connect with other devices, such as USB, Ethernet, Bluetooth, Wi‑Fi, RS‑232, RJ‑45, Parallel, and similar standards.

A list of network communication protocols that a device can use or support, such as TCP/IP, HTTP, HTTPS, FTP, DHCP, DNS, and various wireless standards. Each protocol is represented by its standard name and may be separated by commas or slashes in the source data.

The maximum amount of material that can be fed into the device in a single operation, expressed as a numeric value followed by an appropriate unit such as sheets, pages or volume.

The maximum number of individual pages that a product—such as a book, magazine, or printed publication—can contain. It represents the total count of physical sheets, regardless of layout or formatting, and is useful for assessing the length or volume of the material.

Indicates the presence and quantity of USB connectors on a product. The value is typically an integer representing how many USB ports are available, regardless of type or version.

The mass of the product expressed in a standard unit such as grams or kilograms. It represents how heavy the item is and can be used for shipping calculations, handling instructions, or consumer information.

Indicates whether the product has built‑in Wi‑Fi capability, allowing it to connect to wireless networks without requiring external adapters or dongles.

Indica si el dispositivo admite la tecnología Wi‑Fi Direct, que permite establecer conexiones inalámbricas punto a punto entre dispositivos sin necesidad de un router o punto de acceso.

A list of the wireless networking protocols and frequency bands that a device can connect to, such as 802.11a, 802.11b, 802.11g, Wi‑Fi 4 (802.11n), Wi‑Fi 5 (802.11ac) or Wi‑Fi 6 (802.11ax). The values are typically separated by commas and may include both the technical name and a consumer‑friendly label.

The horizontal measurement of a product, expressed in a linear unit such as millimetres or inches. It indicates how wide the item is from one side to the other and is used for sizing, fitting, and compatibility purposes.

A list of Microsoft Windows operating system versions that the product is compatible with, including any relevant architecture or edition information.